Summary
Tiling is priced per square metre by almost everyone, and the per-metre figure is where tilers lose money. A customer compares £40/m² with £30/m² and takes the £30, not knowing that the £30 excludes the backer board, the tanking, the trims, the 40% cutting waste on a herringbone layout and the day spent levelling a floor that was never flat. The tiler who quoted £30 then either does all of that for nothing or has an argument on day two. The alternative is to build the price from the day rate, which carries the tiler's real costs, converted to a per-metre figure for each tile type and layout at the output that layout actually achieves, with the preparation as separate priced lines the customer can see.
Tiling output varies more than most trades. A competent tiler lays 10–15 m² of 300 × 600 mm porcelain on a flat floor in a day; the same tiler lays 4–6 m² of 50 mm mosaic or a herringbone with a 45° cut on every piece at the perimeter. A bathroom with a bath, a shower niche, a window reveal and a boxed soil pipe is three days of cutting for 20 m² that the per-metre price has to carry. This guide builds the day rate from 2026 costs, gives the regional figures, converts the rate to per-metre prices by tile type and layout at realistic outputs, prices the preparation and tanking separately, and shows a worked bathroom.
For the method across all trades see pricing labour; for converting day and hourly rates see day rate to hourly rate calculator; for the per-room detail see bathroom tiling pricing guide, wall tiling pricing guide and floor tiling pricing guide.
Key Facts
- Day rate, 2026 — £200–£300 regionally; £250–£350 South East; £300–£420 London. Top of range for large-format, natural stone, wet rooms and tilers with a design reputation
- Hourly equivalent — £30–£60, derived by dividing the day rate by 6.5–7 billable hours
- Walls, standard ceramic/porcelain 200 × 250 to 300 × 600 mm, labour — £35–£60/m²; output 6–10 m² a day
- Floors, standard 300 × 300 to 600 × 600 mm porcelain, labour — £40–£70/m²; output 8–15 m² a day on a flat substrate
- Large-format (one side over 600 mm, or 1200 × 600 and above) — £60–£100/m²; output 5–8 m² a day; two tilers for 1200 × 1200 and above. See large format tiles installation
- Mosaic (sheets) — £60–£120/m²; output 3–6 m² a day. See mosaic tile installation
- Herringbone and patterned layouts — +30–50% on the straight-lay labour rate; wastage 15–20% vs 10% straight; see herringbone tile pattern
- Natural stone — £60–£110/m² plus sealing (£8–£15/m²); see natural stone
- Preparation — tile backer board £15–£25/m² supplied and fitted; self-levelling compound £10–£20/m²; tanking a shower area £150–£300; removing old tiles £10–£20/m² plus disposal; see tile backer board guide and bathroom floor prep
- Trims and movement joints — trims £5–£15 per linear metre fitted; movement joints at perimeters and at 8–10 m intervals on floors per BS 5385-3; see expansion and movement joints
- Grout and sealant — included in the per-metre labour, materials extra; epoxy grout +£10–£20/m² for the extra labour; see epoxy grout guide
- Half-day minimum — £150–£200; a splashback or a repair of six tiles is a half-day with travel, mixing and grouting on a return visit
- Return visit for grouting — floors on standard adhesive need 24 hours before grouting; price the return as part of the job, not as a free extra
- Billable days per year — 200–215 after holidays, quoting, waiting for other trades (the plumber who has not finished the first fix), sickness
- Materials markup — 15–25% on adhesive, grout, trims, backer board, tanking kits, sealant, spacers; tiles themselves are usually customer-supplied — if you supply them, 15–25% on trade cost plus delivery and the wastage allowance
- Wastage — 10% straight lay, 15% diagonal, 15–20% herringbone, 20%+ on large-format with many cuts; put the percentage on the quote
- BS 5385 — Part 1 (internal walls), Part 3 (floors), Part 4 (wet areas and swimming pools), Part 5 (terrazzo and stone); the standards that define acceptable substrates, adhesives and movement joints
- Weight limits — plaster skim 20 kg/m² maximum tile and adhesive weight, plasterboard direct 32 kg/m², tile backer board 50–60 kg/m²; a 10 mm porcelain is 22–25 kg/m² with adhesive, which rules out tiling onto skim
- VAT — compulsory registration above £90,000; a tiler supplying tiles reaches it sooner than one supplying labour only
- Insurance — public liability £1–£2 million, £500–£800 a year
- Consumer Rights Act 2015, s.51 — reasonable price where none agreed; a written per-metre rate with the preparation and wastage stated protects both sides
Quick Reference Table
Spending too long on quotes? squote turns a 2-minute voice recording into a professional quote.
Try squote free →| Charge | Regional (outside London/SE) | South East | London | Notes |
|---|---|---|---|---|
| Day rate, tiler, own tools | £200–£300 | £250–£350 | £300–£420 | 6.5–7 billable hours |
| Hourly equivalent | £30–£45 | £38–£55 | £45–£60 | Small works only |
| Half-day minimum | £150–£200 | £180–£240 | £200–£280 | Splashbacks, repairs |
| Walls, standard tile, per m² labour | £35–£55 | £40–£60 | £50–£75 | 200 × 250 to 300 × 600 mm |
| Floors, standard porcelain, per m² labour | £40–£60 | £45–£70 | £55–£85 | 300 × 300 to 600 × 600 mm |
| Large-format, per m² labour | £60–£90 | £70–£100 | £85–£120 | Two tilers above 1200 × 600 |
| Mosaic, per m² labour | £60–£100 | £70–£110 | £85–£130 | |
| Herringbone / pattern uplift | +30–50% | +30–50% | +30–50% | On the straight-lay rate |
| Natural stone, per m² labour | £60–£100 | £70–£110 | £85–£130 | Plus sealing £8–£15/m² |
| Tile backer board, per m² supplied and fitted | £15–£25 | £18–£28 | £22–£35 | 6 mm or 12 mm cement board |
| Self-levelling compound, per m² | £10–£20 | £12–£22 | £15–£25 | Plus primer |
| Tanking a shower enclosure (walls and tray upstand) | £150–£300 | £180–£340 | £220–£400 | Kit + labour |
| Remove old tiles, per m² | £10–£20 | £12–£22 | £15–£25 | Plus disposal; skim damage extra |
| Trims, per linear metre fitted | £5–£15 | £6–£16 | £8–£18 | Aluminium or PVC; brass/stainless more |
| Standard bathroom (20 m² walls, 5 m² floor), labour and prep, excluding tiles | £1,400–£2,400 | £1,700–£2,800 | £2,100–£3,400 | See worked example |
Detailed Guidance
Building the day rate from your costs
A sole-trader tiler outside London:
| Item | Annual figure |
|---|---|
| Target income before tax | £36,000 |
| Van: finance or depreciation, insurance, tax, servicing, work fuel | £6,500 |
| Public liability insurance | £600 |
| Tools: wet cutter, bridge saw blades, levelling system clips, mixers, trowels, replacement | £1,500 |
| Consumables not recharged: blades, spacers, sponges, buckets, sealant guns | £500 |
| Phone, accountant, software, card fees | £1,800 |
| Workwear, PPE, FFP3 for silica dust when cutting porcelain | £400 |
| Advertising, website, directory listings | £900 |
| Pension contribution | £2,400 |
| Total to recover | £50,600 |
A tiler working 46 weeks and losing a day a week to quoting, collecting materials and waiting on other trades has about 207 billable days. £50,600 ÷ 207 = £244 a day to earn £36,000 before tax. At £200 a day the income before tax is about £27,000; at £300 it is about £47,000.
Materials are not in the table. Adhesive (£12–£25 per 20 kg bag, 1 bag per 4–6 m² on walls, 1 per 3–4 m² on floors with a 10 mm trowel), grout, trims, backer board and tanking go on the quote at trade cost plus 15–25%. A tiler who "throws in" the adhesive on a £220 day is giving away £30–£60.
Converting the day rate into per-metre prices
The per-metre rate is the day rate divided by realistic output, plus the uplift for preparation, cutting and the grouting return:
| Work | Realistic output per day | Day rate £244 ÷ output | Charged |
|---|---|---|---|
| Walls, 300 × 600 porcelain, straight, few cuts | 8–10 m² | £24–£31 | £35–£55/m² |
| Walls, same tile, bathroom with bath, niche, window | 5–7 m² | £35–£49 | £45–£65/m² |
| Floors, 600 × 600 porcelain, flat substrate | 10–15 m² | £16–£24 | £40–£60/m² |
| Floors, same tile, L-shaped kitchen, many cuts | 7–10 m² | £24–£35 | £45–£70/m² |
| Large-format 1200 × 600 walls | 5–7 m² | £35–£49 | £60–£90/m² |
| Mosaic sheets | 3–5 m² | £49–£81 | £60–£100/m² |
| Herringbone 100 × 400 on a floor | 5–7 m² | £35–£49 | £55–£85/m² |
The charged figure is above the simple division because the output figures are for laying only. A day's tiling includes setting out, mixing, cutting at the perimeter (with a wet cutter outside, in the rain, with a mask), cleaning off, and a return visit to grout and seal. The per-metre price carries all of that; the day rate only carries the hours. Where a job is small enough that the per-metre total falls below the half-day minimum, charge the minimum.
Preparation is a separate line, always
The commonest tiling dispute is about what was included. Put the preparation on the quote as lines, with a price each, so the customer can see what they are paying for and what happens if they decline it:
- Substrate assessment — a wall that is plaster skim cannot take porcelain (20 kg/m² limit); plasterboard direct takes 32 kg/m²; anything heavier, and every wet area, is tile backer board. A floor that is chipboard needs an overlay (6 mm backer board or 12 mm ply screwed at 300 mm centres) or a decoupling membrane; a floor that is out of level by more than 3 mm in 2 m needs levelling compound. See tile backer board guide and floor tile adhesive
- Tanking — a shower enclosure, a wet room and the wall above a bath with a shower over it are tanked (liquid membrane or sheet system) before tiling under BS 5385-4; it is not optional and it is not free. £150–£300 for a standard enclosure
- Removing old tiles — £10–£20/m² plus disposal, with a stated contingency for the plaster that comes off with them (it always does); re-boarding priced separately
- Movement joints — at the perimeter of every floor and at 8–10 m intervals, and at the junction of wall and floor in wet areas; sealant rather than grout at internal corners. Price the sealant lines
- Trims — per linear metre, with the type stated; brass and stainless are three times the price of aluminium
A quote that lists "tiling, 25 m², £1,000" is an invitation to argue. One that lists the tiling, the board, the tanking, the trims and the removal separately is a contract.
Worked example: standard family bathroom
Bath with shower over, basin, WC, 300 × 600 mm porcelain walls to ceiling (20 m²), 600 × 600 mm porcelain floor (5 m²), one window reveal, one boxed soil pipe, tiles supplied by the customer:
Preparation
Remove old tiles, 20 m² × £15 = £300
Re-board damaged areas, 8 m² backer board × £20 = £160
Tank bath/shower area, walls and bath upstand = £220
Floor: 6 mm backer board overlay, 5 m² × £20 = £100
Tiling labour
Walls, bathroom-grade complexity, 20 m² × £50 = £1,000
Floor, 5 m² × £50 = £250
Trims, 12 lin m × £10 = £120
Silicone to all internal corners and bath line = £60
Materials (adhesive 7 bags, grout, primer, spacers,
sealant, levelling clips) £240 + 20% = £290
Disposal (old tiles, 2 bulk bags) = £80
--------
Quote, excluding tiles £2,580
Tiles: customer-supplied; wastage 12% advised on the order
Programme: 5 days (prep 1.5, walls 2, floor 0.5, grout/seal 1)
Five days at £244 is £1,220 of day rate; the quote returns £1,930 in labour and prep lines — the difference is the cutting, the window reveal, the boxing, the tanking and the return visit, all of which the per-metre and per-line prices carry and a bare day rate would not. See bathroom tiling pricing guide for the per-room variants.
When to use the day rate instead
- Working for a builder or a bathroom-fitting company — the builder sets the programme and supplies the materials; agree a day rate (£180–£260 regionally in 2026), the start time, that the substrate will be ready, and a half-day charge for a wasted visit. CIS applies: 20% deducted at source on labour if registered; see cis tax explained
- Repairs and investigation — six cracked floor tiles over a hollow spot, a leaking shower corner, a failed grout line: a half-day minimum, with the tile match (see tile removal without damage) and the grouting return included
- Commercial fit-outs — usually per m² on a measured bill, but day rate for the snagging and the alterations
Regional, London and seasonal factors
The spread from the cheapest regions to London is 40–50%, and London adds parking (£15–£40 a day as a disbursement), ULEZ on older vans and slow travel. Tiling is largely counter-seasonal to external trades — bathrooms get done in autumn and winter — and a tiler with a reputation is booked two to three months ahead, which justifies the top of the range. External tiling (porcelain paving, balconies) is a March-to-October trade with its own rules; see external tiling and outdoor porcelain paving tiles.
Quoting, deposits and payment
Written quote for every job with the tile type and size, the layout, the preparation lines, the trims, the wastage percentage, the programme and the day rate for extras. State that the customer-supplied tiles must be on site, checked for batch and calibre, before the start date. Materials deposit of 25–40% on anything over £800. Invoice on completion with 7-day terms; stage payments on anything over a week. The Consumer Contracts Regulations 2013 give a 14-day cancellation right on contracts agreed in the customer's home; see quotes vs estimates.
Frequently Asked Questions
What is a fair day rate for a tiler in 2026?
£200–£300 a day outside London and the South East for a self-employed tiler with their own tools, £300–£420 in London. Those figures give a mid-£30,000s income before tax on about 207 billable days once the van, tools, insurance and pension are paid for. A day rate for a builder or bathroom company is lower (£180–£260) because the materials, the programme and the substrate are theirs.
How much do tilers charge per square metre?
£35–£60/m² labour for standard wall tiles, £40–£70/m² for floors, £60–£120/m² for large-format, mosaic, stone and patterned layouts, outside London in 2026. Preparation — backer board, levelling, tanking, removing old tiles — is extra and should be priced as separate lines, because it varies more between jobs than the tiling does.
How many square metres can a tiler do in a day?
6–10 m² of standard wall tiles, 8–15 m² of standard floor tiles on a flat substrate, 5–8 m² of large-format and 3–6 m² of mosaic. A bathroom with a bath, a niche and a window reveal halves wall output. Anyone quoting 20 m² a day of bathroom walls is describing a straight run of blank wall, not a bathroom.
Should preparation be included in the per-metre price?
No. Put it on the quote as separate lines — backer board per m², tanking per enclosure, levelling per m², tile removal per m² — with a price each. It is what the customer is comparing when they compare quotes, and it is what BS 5385 requires for the tiling to last. A quote that hides it in the per-metre figure loses to the tiler who left it out, and then costs the customer twice when the tiles fail.
Do I need to charge VAT?
Only once taxable turnover passes £90,000 in a rolling 12 months. A tiler who supplies tiles as well as labour reaches that on quite modest labour income because the tiles pass through the turnover figure; a labour-only tiler rarely does. Watch the rolling total monthly; see vat registration for tradespeople.
Regulations & Standards
Consumer Rights Act 2015 (s.49–s.52) — reasonable care and skill; reasonable price where none agreed
Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 (SI 2013/3134) — 14-day cancellation right for contracts agreed in the customer's home
Income Tax (Construction Industry Scheme) Regulations 2005 (SI 2005/2045) — deductions on labour when working for a contractor
Value Added Tax Act 1994 — compulsory registration threshold £90,000 (from 1 April 2024)
Health and Safety at Work etc. Act 1974 — general duties for the self-employed
Control of Substances Hazardous to Health Regulations 2002 (SI 2002/2677) — respirable crystalline silica from cutting porcelain and stone (WEL 0.1 mg/m³ 8-hour TWA); wet cutting and FFP3 RPE
BS 5385-1:2018 — wall tiling; design and installation of internal ceramic, natural stone and mosaic wall tiling in normal internal conditions
BS 5385-3:2014 — design and installation of internal and external ceramic and mosaic floor tiling in normal conditions; movement joints
BS 5385-4:2015 — design and installation of ceramic and mosaic tiling in specific conditions (wet areas, swimming pools)
BS 5385-5:2009 — design and installation of terrazzo, natural stone and agglomerated stone slab and tile flooring
BS EN 12004-1:2017 — adhesives for ceramic tiles; classification (C1, C2, S1, S2)
BS EN 13888-1:2022 — grouts for ceramic tiles; classification (CG1, CG2, RG)
BS EN 14411:2016 — ceramic tiles; definitions, classification and marking
Building Regulations 2010, Approved Document C — resistance to moisture; wet-area construction behind tiling
Construction Industry Joint Council Working Rule Agreement — employed site rates, for context only
Consumer Rights Act 2015, Part 1 Chapter 4 — services — reasonable price and reasonable care and skill
HMRC — Construction Industry Scheme (CIS) — who must register and deduction rates
HMRC — VAT registration thresholds — £90,000 compulsory threshold
HSE — Construction dust: respirable crystalline silica — cutting tiles safely
The Tile Association — Technical guidance and BS 5385 summaries — substrate weight limits, wet-area tanking, movement joints
BSI — BS 5385 series — the wall and floor tiling codes of practice
pricing labour — the cost-based pricing method and baseline day rates by trade
day rate to hourly rate calculator — converting between day rate, hourly rate and billable hours
bathroom tiling pricing guide — the per-room bathroom pricing in detail
wall tiling pricing guide — wall tiling per m² by tile type
floor tiling pricing guide — floor tiling per m² and preparation
tile quantities — tile and wastage take-off
tile adhesive coverage calculator — adhesive bags per m² by trowel size
tile backer board guide — substrate weight limits and board selection
plasterer day rate guide — the equivalent guide for plasterers, often the trade before the tiler