Summary

Plastering is one of the few trades where customers still ask for a day rate first, because the work is visible, physical and measured in rooms. That is also why plasterers tend to under-price. A day on the trowel looks like a day's work; the hour spent sheeting up and masking, the hour spent cleaning tools and the van, the quoting visit the evening before and the unpaid drive to the merchant for another bag of Multi-Finish do not. A plasterer charging £180 a day and doing three rooms a week is often earning less, once materials are chased and the van is paid for, than the labourer on a site next door under the Construction Industry Joint Council (CIJC) rates.

The market is also distorted by the per-metre rates that get quoted on forums and in customer-facing price comparison sites. A rate of £12/m² for a skim sounds reasonable until it is applied to a 10 m² box room with two windows, a door, a radiator to drop and a ceiling with a cracked Artex finish — the per-metre figure assumes big open walls and a sound background, and small, awkward or badly prepared rooms need a minimum charge or a day rate instead. This guide builds the day rate from costs, shows 2026 market figures by region, converts the day rate into per-metre and per-room prices that pay, and explains where to use each.

For the method across all trades see pricing labour; for converting between day and hourly rates see day rate to hourly rate calculator; for the quantities behind a materials quote see plaster quantities.

Key Facts

Quick Reference Table

Spending too long on quotes? squote turns a 2-minute voice recording into a professional quote.

Try squote free →
Charge Regional (outside London/SE) South East London Notes
Day rate, single spread £200–£300 £250–£350 £300–£420 6.5–7 billable hours
Day rate, spread + labourer (gang) £320–£460 £380–£520 £440–£600 Big rooms, render, boarding
Hourly equivalent £30–£45 £38–£55 £45–£60 For small works only
Half-day / minimum charge £150–£200 £180–£240 £200–£280 Patches, single walls
Skim, walls (per m² labour) £15–£22 £18–£25 £22–£30 Sound plasterboard background
Skim, ceilings (per m² labour) £18–£26 £20–£30 £25–£35 Overhead premium
Float and set (per m² labour) £25–£40 £30–£45 £35–£50 Blockwork or brick
Bonding + skim over old plaster/Artex (per m²) £22–£35 £25–£40 £30–£45 Asbestos check first on pre-2000 Artex
Sand and cement render, 2-coat (per m² labour) £35–£50 £40–£55 £45–£60 Plus scaffold or tower
Dot and dab boards (per m² labour) £12–£18 £14–£20 £16–£24 Boards extra
Small bedroom, walls + ceiling skim (all-in) £400–£650 £500–£750 £600–£900 Materials included
Hall, stairs and landing skim (all-in) £650–£1,100 £800–£1,300 £1,000–£1,600 Includes tower hire

Detailed Guidance

Building the day rate from your costs

Work forwards from what the business costs, not backwards from what the plasterer down the road charges. A sole-trader plasterer outside London:

Item Annual figure
Target income before tax £36,000
Van: finance or depreciation, insurance, tax, servicing, work fuel £6,500
Public liability insurance £600
Tools, trowels, mixers, hop-ups, replacement and repair £1,200
Tower hire allowance not recovered on jobs £500
Phone, accountant, software, bank charges £1,800
Workwear, PPE, FFP3 masks for sanding and mixing £300
Advertising, website, trade directory listings £900
Pension contribution £2,400
Total to recover £50,200

Divide by billable days. A plasterer who works 46 weeks but loses a day a week to quoting, materials runs, rained-off external work and chasing payment has roughly 205 billable days: £50,200 ÷ 205 = £245 a day. That is the break-even day rate for a £36,000 income. Charge £200 and the income falls to about £27,000 before tax; charge £300 and it rises to about £47,000. Those two numbers are the whole argument for not pricing by what the competition says.

Note what is missing from the table: materials. Plaster, beads, scrim, PVA and bonding are passed through on each quote at cost plus 15–25%, never absorbed into the day rate. A spread who "includes materials" in a £220 day rate has given away £30–£60 a day.

Converting the day rate into per-metre prices

Customers compare per-metre figures, so you need yours to reconcile with the day rate. The arithmetic is output-based:

Task Realistic output per spread per day Day rate £245 ÷ output Charge (with minimum)
Skim over sound plasterboard, walls 25–35 m² £7–£10/m² £15–£22/m²
Skim, ceilings 20–25 m² £10–£12/m² £18–£26/m²
Float and set, blockwork 10–14 m² £17–£25/m² £25–£40/m²
Bonding + skim over old plaster 12–18 m² £14–£20/m² £22–£35/m²
Sand and cement render, 2 coats 8–12 m² £20–£30/m² £35–£50/m²
Dot and dab 12.5 mm boards 25–40 m² £6–£10/m² £12–£18/m²

The gap between the two right-hand columns is deliberate. The day-rate-divided-by-output figure assumes a full day of uninterrupted spreading on a clean background. Real rooms have reveals, boxed pipes, radiators, sockets to cut around, a ceiling rose and a day that starts with sheeting up. The per-metre charge carries the prep, the beads and the cleaning down; the day rate only carries the hours. If a job is small enough that the per-metre total falls below the half-day minimum, charge the minimum.

Worked example — 3.6 m × 3.2 m bedroom, 2.4 m ceiling, skim over existing sound plaster, one window, one door:

Walls:   perimeter 13.6 m × 2.4 m = 32.6 m²
         less window 1.8 m² and door 1.7 m²   = 29.1 m²
Ceiling: 3.6 × 3.2                             = 11.5 m²

Labour:  29.1 m² × £18 = £524
         11.5 m² × £22 = £253
                                               £777
Materials: 3 bags Multi-Finish £30, PVA £8,
           scrim and beads £20, sheeting £10    £68 (+20% = £82)
Quote:                                         £859  (approx 1.5 days)

At £245 a day that 1.5-day job returns £368 for the labour as a day rate; sold per metre it returns £777. The difference is the prep, the two coats, the trowelling up at the end and the fact that a bedroom and a half rarely fits neatly into a day and a half. Both are legitimate; per metre is what the market expects and it pays better on domestic rooms.

When to use the day rate instead

Day rate is the right basis when the quantity cannot be measured in advance or the customer controls the scope:

State in writing that a day is 7.5 hours on site including breaks, that the rate excludes materials, skip and access equipment, and that a day started is a day charged. Without that, "day rate" means whatever the customer decides it means at invoice time.

Regional and seasonal pricing

The regional spread in the tables is about 40% from the cheapest regions (North East, Wales, parts of the Midlands) to London. The driver is the same cost base — van, insurance, fuel — against very different housing stock and demand. London plasterers also carry parking (£15–£40 a day in inner boroughs, which goes on the quote as a disbursement), ULEZ charges on older vans and congestion charge inside the zone.

Seasonally, external render is a March-to-October trade; Portland cement render should not be applied below 5°C or when frost is forecast within 24 hours, and lime render needs 10°C or more. A spread who relies on external work needs a higher summer day rate to carry the winter, or an internal workload lined up for it. Winter internal work also dries slowly in unheated properties, so build return visits into the quote rather than waiting on site.

Employed rates for context

Customers who have seen "plasterer salary £30,000" on a jobs site are looking at an employed figure. The CIJC Working Rule Agreement sets the general operative and skilled rates that site plasterers are paid under, and an employed plasterer on a large site typically earns £15–£20 an hour in 2026, with holiday pay, pension and employers' NI on top paid by the employer. A self-employed plasterer's day rate has to fund all of that plus the van, tools, insurance and the unpaid days. The two figures describe different jobs and should never be compared directly.

Quoting, deposits and payment

Give a written quote for every domestic job, even a half-day, listing the rooms or areas, the system (skim, bonding and skim, render), what preparation is included, what is excluded (moving furniture, removing wallpaper, mist coating), the materials allowance and the day rate for any extras. Take a 25–50% materials deposit on anything over £500 and invoice on completion with 7-day terms. Where the customer wants to supply the plaster, say no: open or old bags, wrong product for the background and no comeback if it fails. A written quote is also what the Consumer Rights Act 2015 and the Consumer Contracts Regulations 2013 lean on if there is a dispute; for the 14-day cancellation rules on quotes agreed in the customer's home see quotes vs estimates.

Frequently Asked Questions

Is £250 a day too much for a plasterer?

Not for a competent self-employed plasterer in most of England in 2026. Once the van, insurance, tools, pension and the 50 or so unpaid days a year are taken out, £250 a day on 205 billable days produces an income before tax in the mid-£30,000s — a reasonable return for a skilled trade. It only looks high if it is compared with an employed hourly wage that has none of those costs in it.

Should I quote per metre or per day?

Per metre (or per room) for domestic work where you can measure the job and control the background — it pays better and it is what customers can compare. Day rate for site work for builders, for patches and making good, for investigative hack-off and for any job where the customer controls the scope. Whichever you use, put it in writing with what it includes.

How many square metres can a plasterer skim in a day?

A good spread working alone will skim 25–35 m² of wall or 20–25 m² of ceiling in a day over a sound plasterboard background, which is roughly a medium bedroom's walls and ceiling. With a labourer mixing and keeping the boards up, 40–50 m² is achievable on open walls. Output halves on float-and-set over blockwork and drops further on rooms with lots of reveals and services.

Do I need to charge VAT on plastering?

Only if your taxable turnover goes over £90,000 in any rolling 12 months, at which point registration is compulsory. Most sole-trader plasterers are below the threshold. If you are close to it, remember that domestic customers cannot reclaim VAT, so registering effectively makes you 20% dearer to them overnight; see vat registration for tradespeople.

What should I charge a builder for day work?

Agree a gang rate rather than a single rate if you bring a labourer — £320–£460 a day regionally for a spread and labourer, more in London. Confirm whether it is CIS-deductible, what the start time is, that the background will be ready, and that a wasted visit is charged at half a day. Builders pay slower than homeowners; 30-day terms are normal, so the rate needs to carry that.

Regulations & Standards