Summary

Gas engineers price in three ways at once. Breakdowns and repairs are hourly, with a first-hour charge that pays for the drive and the fault-finding whether or not a part is fitted. Routine work — services, safety records, cooker connections, fire servicing — is at fixed prices that everyone in the area knows, which the hourly rate has to reconcile with: a £90 boiler service that takes 60 minutes plus 25 minutes' travel is £64 an hour before the analyser, the registration and the van are paid for. Installations are quoted as jobs, where a one-day combi swap at £1,000–£1,400 labour is the day rate in disguise. An engineer who does not know their own hourly rate cannot tell whether the £90 service pays, whether the £1,100 labour on the swap is right, or why the year's takings do not match the year's hours.

This guide builds the hourly rate from 2026 costs, including the costs specific to gas, gives the regional market figures for the hourly rate, the call-out and the common fixed prices, reconciles them, and sets out the regulatory framework that is the reason the rate is what it is: the Gas Safety (Installation and Use) Regulations 1998, Gas Safe registration and the ACS competence scheme, and the paperwork that each job generates. For the rules see gas safe requirements; for the fixed-price jobs see boiler service pricing guide and gas safety certificate pricing guide; for the method across all trades see pricing labour.

Key Facts

Quick Reference Table

Spending too long on quotes? squote turns a 2-minute voice recording into a professional quote.

Try squote free →
Charge Regional (outside London/SE) South East London Notes
Hourly rate £45–£75 £55–£90 £70–£110 After the first hour; half-hour units
Call-out / first hour £80–£140 £100–£160 £120–£180 Travel + diagnosis
Out of hours call-out £120–£220 £150–£250 £180–£300 Evenings, weekends
Day rate equivalent, install £300–£450 £360–£520 £400–£600 Solo, 7–8 hours
Engineer + mate, day £550–£800 £620–£900 £700–£1,000 Conversions, system changes
Boiler service £80–£130 £90–£145 £100–£160 45–75 min on site
CP12, one appliance £60–£110 £70–£120 £80–£140 +£10–£25 per extra appliance
Service + CP12 bundle £120–£180 £135–£200 £150–£230
Combi swap, labour only £1,000–£1,400 £1,150–£1,600 £1,300–£1,800 1–1.5 days, flue included
Gas cooker / hob connection £70–£120 £80–£140 £90–£160 45–60 min, bayonet or rigid
Gas fire service £70–£110 £80–£130 £90–£150
Gas tightness test / investigation £80–£150 £90–£170 £100–£200 First hour plus
Parts markup 20–30% 20–30% 20–30%

Detailed Guidance

Building the hourly rate from your costs

A sole-trader Gas Safe engineer outside London doing services, breakdowns and 15–25 boiler installs a year:

Item Annual figure
Target income before tax £45,000
Van: finance or depreciation, insurance, tax, servicing, fuel (gas engineers drive more than most) £9,500
Public liability (£2 million, gas declared) and tools cover £900
Gas Safe registration (annual renewal, one engineer) £200
ACS reassessment amortised (£1,200 per 5 years + 3 days off tools) £450
Flue gas analyser calibration, sensors, replacement amortised £350
Tools: manometers, leak detection, power tools, pipe tools, replacements £1,200
Consumables not recharged: PPE, test fluids, small fixings £500
Phone, software (job management, CP12 app), accountant, bank, card fees £2,400
Advertising, website, directories, manufacturer scheme memberships £1,500
Training and manufacturer courses (unvented, controls, heat pump upskilling) £600
Pension contribution £3,000
Total to recover £65,600

An engineer working 46 weeks at 8.5 hours a day, billing 5.5 of them, has about 1,265 billable hours. £65,600 ÷ 1,265 = £52 an hour to earn £45,000 before tax. At £45 an hour the income before tax is about £36,000; at £65 it is about £61,000. The regional range of £45–£75 is a wide one because the billable-hours figure varies so much: an engineer on a tight urban patch with services booked back to back bills 6.5 hours; a rural engineer covering 40 miles between calls bills 4.5 and needs £65 an hour to earn the same.

Reconciling the fixed prices with the hourly rate

Every fixed price in the area is a judgment on how long the job takes and what else it carries:

Job Time on site Travel share Hourly equivalent at £90 service Verdict
Boiler service at £90 60 min 25 min £64/h Below rate; pays only with 6+ a day booked by area
Boiler service at £110 60 min 25 min £78/h On rate
CP12 at £75, one appliance 35 min 25 min £75/h On rate
Service + CP12 at £140 80 min 25 min £80/h Good
Cooker connection at £90 50 min 25 min £72/h On rate
Combi swap labour at £1,100 8 h 1 h £122/h Carries the risk, the Benchmark, the warranty call-backs

The £80 service that undercuts the area is a loss leader, and it is only sensible if it is sold in a batch (a landlord's portfolio, a street of services in one morning) or as the door to the boiler replacement. The install labour is where the hourly rate is exceeded, and rightly: the engineer is liable for the installation for years, does the notification and the Benchmark, and takes the call when the customer cannot work the thermostat.

The call-out charge and what it includes

A breakdown call has three parts: the drive, the diagnosis, and the fix. The call-out or first-hour charge should cover the first two. State it as "£95 call-out including the first hour; £60 per hour or part thereof after; parts extra at trade plus 25%", and the customer who asks "what if you can't fix it?" gets the honest answer: the £95 is for finding out what is wrong, and a written diagnosis with a part price is what they get for it. Engineers who charge nothing if they cannot fix it have priced their time at zero on the worst day. Out of hours, the call-out rises to £120–£220 and the hourly rate goes ×1.5, and the customer is told that before you leave the house.

Installation pricing

A combi swap is the engineer's biggest ticket and the one most often under-priced against the national installers who buy boilers at volume. The sum:

Like-for-like combi swap, regional, solo engineer

Labour at install rate: 1.25 days × £880                = £1,100
   (not the £360 day-rate floor: see the note below)
Boiler (trade): £1,050 → charged at +15%                = £1,208
Flue kit, plume kit, filter, inhibitor, cleaner,
   condensate, gas pipe upgrade allowance (+20–25%)      =   £360
Controls (Boiler Plus compliant smart thermostat, +20%)  =   £190
Notification, Benchmark, warranty registration           =    £15
Disposal of old boiler (scrap value offsets)             =    £20
                                                          ------
Quote (ex VAT)                                           £2,893  → £2,900

The labour line is the whole argument: £1,100 for 1.25 days is not £360 a day, because the day rate equivalent is the floor for a day's labour and the install rate carries the liability, the warranty support and the fact that 20 installs a year is where the engineer's year is made or lost. A national installer quoting £2,400 for the same swap is buying the boiler £300 cheaper and sending an engineer on £250 a day; the sole trader does not compete on that number, they compete on the person who turns up.

What is gas work, and who can do it

Everything in this guide assumes Gas Safe registration with the right categories, because the Gas Safety (Installation and Use) Regulations 1998, Regulation 3, make it an offence for anyone not registered to carry out gas work — installing, servicing, repairing, commissioning or disconnecting a gas appliance or fitting — for payment or otherwise. The categories matter: CENWAT for boilers and water heaters, CKR1 for cookers, HTR1 for fires, CPA1 for combustion performance, LPG modules for LPG, commercial categories for anything over the domestic limits. An engineer registered for cookers only cannot service a boiler. A plumber who is not registered cannot disconnect a gas hob to fit a worktop; they can do the water, and the engineer charges £70–£120 for the bayonet. See gas safe requirements and gas regulations overview.

Paperwork, and charging for it

Each job generates records that are part of the price:

The 15 minutes of paperwork on a service is in the £110; the hour of Benchmark and notification on an install is in the £1,100.

Regional and seasonal factors

The spread from the cheapest regions to London is 50–60% on the hourly rate and the call-out, more than for most trades because of the travel time and the parking that London adds and because London breakdowns are priced for same-day response. Seasonally, gas is the most peaked trade there is: October to February is breakdowns at every hour and the engineer turns work away; May to August is services, cookers and installs at a discount to fill the diary. The hourly rate has to be set for the year, with the summer service price as the floor and the winter call-out as the ceiling. Engineers who offer a summer service discount of 10–15% in June and July to landlords and regulars are smoothing the year, not undercutting it.

Frequently Asked Questions

What is a fair hourly rate for a gas engineer in 2026?

£45–£75 an hour outside London and the South East for a self-employed Gas Safe registered engineer with their own van and tools, £70–£110 in London, with a call-out or first-hour charge of £80–£140 covering travel and diagnosis. The rate produces about £45,000 before tax on 1,250 billable hours once the van, registration, ACS, analyser, insurance and pension are paid.

Why does a gas engineer charge more than a plumber?

The same person costs more to run as a gas engineer: Gas Safe registration, ACS reassessment every five years, a calibrated flue gas analyser, insurance that covers gas work, and a legal liability for every appliance they touch. They also bill fewer hours a day, because gas work is spread across more addresses than a plumber's. The 20–30% premium over a plumber's hourly rate is those costs, not a different wage.

How much should I charge for a call-out?

£80–£140 outside London, £120–£180 in London, including travel and the first hour on site, with further time at the hourly rate in half-hour units and parts at trade plus 20–30%. Out of hours, £120–£220 plus time at ×1.5. State it before attending, and charge it whether or not the fault is fixed on the visit — the diagnosis is the product.

How much is a boiler service in 2026?

£80–£130 outside London, £100–£160 in London, for 45–75 minutes on site including the combustion analysis and the written record. Bundled with a Landlord Gas Safety Record it is £120–£180. At the bottom of the range it only pays if several are booked in the same area on the same day.

Can a plumber do gas work if a Gas Safe engineer checks it?

No. Gas work — installing, altering, servicing, repairing, disconnecting a gas appliance or fitting — must be done by a Gas Safe registered engineer with the relevant category; it cannot be done by an unregistered person and "signed off" afterwards. A plumber can do the water and the heating pipework and leave the gas connection to the engineer, who charges for it.

Regulations & Standards