Summary

Carpentry covers more ground than almost any other trade — a first-fix chippy cutting a roof on a new-build site, a second-fix joiner hanging twelve doors in a refurb, a kitchen fitter and a bespoke furniture maker are all "carpenters" to a customer — and the pricing structure has to follow the work. A site carpenter working for a builder is on a day rate because the builder controls the programme; a second-fix carpenter in a homeowner's house is quoting fixed prices because the customer wants a number; a joiner making alcove units is pricing by the piece because the time is mostly in the workshop. The day rate is the common foundation under all three, which is why it has to be right.

Carpenters tend to under-price for two reasons. The first is the employed comparison: the Construction Industry Joint Council (CIJC) rates for a skilled operative produce an hourly figure in the high teens, and customers who have seen "carpenter salary £33,000" are looking at that with the employer's costs stripped out. The second is tools. A carpenter's kit — track saw, mitre saw, first-fix nailer, second-fix nailer, router, planer, drills, a bench — runs to £5,000–£10,000 and depreciates fast, and a day rate that ignores it is a day rate that is slowly selling the tools to the customer. This guide builds the day rate from real 2026 costs, gives the regional figures, shows how to turn the rate into per-door, per-metre and per-item prices for second-fix work, and explains how to price day work for builders without being paid like an employee.

For the method across all trades see pricing labour; for converting day and hourly rates see day rate to hourly rate calculator; for the CIS deductions that apply on site work see cis tax explained.

Key Facts

Quick Reference Table

Spending too long on quotes? squote turns a 2-minute voice recording into a professional quote.

Try squote free →
Charge Regional (outside London/SE) South East London Notes
Day rate, domestic second fix £200–£300 £250–£350 £300–£420 6.5–7 billable hours, own tools
Day rate, site first fix for a builder £180–£260 £220–£300 £260–£350 CIS, builder's programme
Day rate, carpenter + labourer gang £320–£440 £380–£500 £440–£600 Roofs, joists, large stud layouts
Hourly equivalent £30–£45 £38–£55 £45–£60 Small works only
Half-day minimum £150–£200 £180–£240 £200–£280 One door, one shelf
Hang internal door (customer-supplied, existing lining) £60–£110 £70–£130 £90–£160 Hinges, latch, handle; plus £20–£40 if lining needs packing
Fire door FD30 to certified lining £80–£140 £100–£170 £130–£220 Strips, closer, certified ironmongery
Skirting, per linear metre fitted £6–£12 £8–£14 £10–£18 MDF or softwood, scribed, excludes painting
Architrave, per door set £40–£80 £50–£90 £60–£110 Both sides
Stud wall, per m² boarded one side £30–£55 £35–£60 £45–£70 Excludes plastering
Loft boarding on loft legs, per m² £20–£35 £22–£40 £28–£45 Excludes legs/boards
Standard kitchen fit, 8–12 units, labour £800–£2,000 £1,000–£2,400 £1,400–£3,000 3–5 days, plumber and electrician extra
Alcove unit, bespoke, each £600–£1,500 £800–£1,800 £1,000–£2,500 Workshop-made, fitted, unpainted

Detailed Guidance

Building the day rate from your costs

Start from what the business has to recover. A sole-trader second-fix carpenter outside London:

Item Annual figure
Target income before tax £38,000
Van: finance or depreciation, insurance, tax, servicing, work fuel £7,000
Public liability and tool insurance £900
Tools: power tools, blades, nailer gas, bench, replacement cycle £2,000
Consumables not recharged: screws, glue, pins, sandpaper, pencils £600
Phone, accountant, software, card fees £1,800
Workwear, PPE, dust extraction filters £400
Advertising, website, directory listings £900
Pension contribution £2,400
Total to recover £54,000

A carpenter working 46 weeks, averaging 4.5 billable days (quoting, materials runs, a day lost to a late delivery every fortnight) has about 207 billable days. £54,000 ÷ 207 = £261 a day to earn £38,000 before tax. At £200 a day the income before tax is about £25,000; at £300 it is about £46,000. If a chunk of the week is workshop time making things to fit later, that time is billable too — it is just invoiced as part of the item, not as a day on site.

Materials are not in the table. Timber, MDF, doors, ironmongery and fixings go on the quote at cost plus 15–25%. A carpenter who "throws in" the fixings and the odd length of CLS on a £230 day is giving away £20–£40 a day.

Turning the day rate into fixed prices

Domestic customers want a number for the job, and the fixed price is the day rate applied to a realistic output, plus a contingency for the things old houses do:

Task Realistic output per day Day rate £261 ÷ output Fixed price charged
Hang internal doors, existing linings 4–6 doors £45–£65 £60–£110 each
Skirting, scribed and fixed 25–40 lin m £6.50–£10 £6–£12 per m
Architrave, both sides 5–7 door sets £37–£52 £40–£80 per set
Stud wall, CLS, boarded one side 8–12 m² £22–£33 £30–£55 per m²
Loft boarding on legs 10–15 m² £17–£26 £20–£35 per m²

The fixed-price column sits above the simple division because a day hanging doors is never six doors in a row: the first lining is out of plumb, the third door is 10 mm wider than the opening, the customer wants the handles 50 mm higher than standard, and there is a drive to the merchant for the hinges the door came without. Output figures assume good conditions; fixed prices carry the bad ones. State the assumptions ("doors supplied to size; linings plumb and square; existing latch positions reused") so the extra is visible in advance.

Worked example — six internal doors, customer-supplied, existing linings, new hinges and latches, new lever handles supplied by the customer:

Labour:   6 doors × £85                          = £510
Materials: 12 pairs hinges £36, 6 latches £30,
           screws and packers £10                 = £76 (+20% = £91)
Quote:                                            £601   (approx 1.25–1.5 days)

Sold as a day rate that job is £261–£390; sold per door it is £601 and the customer has a price they understand. The difference is the half-day the sixth door takes when the lining needs packing, which the per-door price absorbs and the day rate turns into an argument.

Day work for builders

First-fix work for a builder — joists, studwork, roofs, floor decks, window and door frames — is almost always on a day rate, because the builder sets the programme and the materials are theirs. Price it as a labour-only day rate with these terms in writing:

The site rate is lower than the domestic rate because there is no quoting, no small-job travel and no materials to chase, and the days are continuous. It is still higher than the CIJC employed rate because it carries the van, the tools, the insurance and the unpaid days.

Bespoke joinery and workshop time

Fitted furniture, alcove units, bespoke doors and staircases are priced per item, and the item price is workshop hours plus fitting hours at the same hourly rate, plus the workshop overhead, plus materials at a higher markup (25–35%, because sheet material offcuts and the waste from selecting timber are real costs). A pair of alcove units in 18 mm MR MDF, painted by the decorator:

Workshop: 14 hours × (£40 rate + £10 workshop overhead) = £700
Fitting:  6 hours × £40                                  = £240
Materials: MDF, back panels, hinges, shelf pins, edging  = £260 (+30% = £338)
Quote:                                                   £1,278 for the pair

Keep workshop hours as billable in your own records; the common mistake is to count the fitting day as the only income and treat the two workshop days as free. See fitted furniture and alcove cupboard and shelving installation for the construction detail.

Regional, London and seasonal factors

The spread from the cheapest regions to London is 40–50%, driven by the same cost base against different demand and by London-specific costs: parking (£15–£40 a day, recharged as a disbursement), ULEZ on older vans, and slower travel that costs billable hours. External carpentry — decking, fencing, garden rooms, roofs — is weather-dependent, and a carpenter who relies on it needs internal second-fix work lined up for winter or a summer rate high enough to carry the lost days. Kitchen fitting is counter-seasonal, with a rush before Christmas, and a fitter who is booked three months ahead can and should charge at the top of the range.

Quoting, deposits and payment

Written quote for every domestic job listing the items, the quantities, what is supplied by whom, what preparation and making good is included, and the day rate for extras. Materials deposit of 30–50% on anything over £500 — a kitchen or a staircase is a large deposit because the materials are large. Invoice on completion with 7-day terms for homeowners; card payment on site where possible. The Consumer Contracts Regulations 2013 give a 14-day cancellation right on contracts agreed in the customer's home, and bespoke items made to the customer's specification are the one category where the cancellation right does not apply once work has started — say so in the quote, because it matters for a £1,200 alcove unit that has been cut before the customer changes their mind. See quotes vs estimates.

Frequently Asked Questions

What is a fair day rate for a carpenter in 2026?

£200–£300 a day outside London and the South East for a self-employed carpenter with their own tools and van, £300–£420 in London. Those figures produce a mid- to high-£30,000s income before tax on 200–215 billable days once the van, tools, insurance and pension are paid for. A site day rate for a builder is lower (£180–£260) because the work is continuous and there is no quoting or materials chasing.

Should I charge per door or per day for hanging doors?

Per door for domestic customers — £60–£110 each for an internal door on an existing lining, with the assumptions stated. It pays better than a day rate once the fourth door's lining turns out to be out of square, and the customer gets a price they can compare. Day rate only when a builder is supplying the doors, the linings and the programme.

How much should I add for materials?

15–25% on timber, sheet material, doors and ironmongery; 25–35% on bespoke joinery materials where waste and selection are significant. The markup covers the time spent ordering and collecting, the stock on the van, and the offcuts that never get used. Charge materials at the current merchant price, not at what the timber in your rack cost last spring.

Does CIS apply to me?

Only when you are paid by a contractor — a builder, developer or another tradesperson acting as the main contractor. Work direct for a homeowner is outside CIS. On contractor work, 20% is deducted from the labour element at source if you are registered, 30% if not, and reclaimed through your Self Assessment return; see cis tax explained.

When should I use an hourly rate?

Rarely. Small jobs that cannot be quoted — easing a sticking door, refixing a loose newel, a half-hour of investigation — are better handled with a half-day minimum charge than an hourly rate, because the travel and set-up for a 30-minute job are the same as for a 3-hour one. If you do quote hourly, pair it with a first-hour minimum of £80–£120.

Regulations & Standards