Summary

Spraying white uPVC windows anthracite grey has become one of the fastest-growing exterior finishing jobs in the UK. It costs the customer a fifth of replacement, takes two days instead of a week, and the frames are usually sound: the customer wants the colour, not new windows. For the tradesperson it is a decorating job with a spraying skill, a chemistry risk and a reputational risk, because a coating that peels after two winters is on every window of the house.

This guide prices the job as it is done properly: a degrease to remove the mould-release and the years of silicone polish, a mechanical key, an adhesion primer or a self-priming system, two or three coats of a flexible topcoat designed for PVC-U, applied with HVLP or airless equipment with the glass, brick and sills masked. It covers per-unit pricing, the day-rate build-up, materials, the respiratory protection that two-pack paints demand, what changes the price (dark colours, bays, upstairs access, conservatories), and the warranty wording that keeps the job from coming back. For the technique in detail see painting upvc windows and doors; for cabinet work with the same equipment see kitchen cabinet spray painting guide.

The pricing misconception is that this is a quick job because the paint goes on in minutes. Masking is half the labour. A window with a Georgian bar, a lead effect or a horn detail takes twice as long to mask as a plain casement, and a conservatory is mostly masking.

Key Facts

Quick Reference Table

Spending too long on quotes? squote turns a 2-minute voice recording into a professional quote.

Try squote free →
Item Inside and outside Outside only Notes
Standard casement window (up to 1.2 m × 1.2 m) £75–£150 £50–£90 Plain profile, no bars
Large window or window with Georgian bars £120–£220 £80–£150 Masking time doubles
Bay window (three sections) £250–£450 £180–£300 Price per section
Front or back door with frame £150–£300 £100–£200 Remove furniture
French doors £250–£450 £180–£320 Two leaves plus frame
Bifold doors (three to five leaves) £400–£900 £300–£650 Track and gaskets masked
Sliding patio door £300–£500 £200–£350
Conservatory frames and roof bars £900–£2,500 — Hourly or day rate
Garage door (steel) £200–£400 £200–£400 Different primer
Fascias and soffits, per linear metre £8–£15 £8–£15 Often added to a house job
Whole three-bedroom semi £1,800–£3,500 £1,300–£2,500 10–12 windows, 2 doors
Whole four-bedroom detached £3,000–£5,500 £2,200–£4,000 15–20 windows, 2 doors, garage

Detailed Guidance

What the job involves and where the time goes

A window is sprayed in four stages. Preparation: remove the handles and furniture, wash down with a uPVC cleaner, degrease with a solvent wipe (panel wipe or the system's own cleaner) to remove silicone polish and mould-release agent, abrade with a fine abrasive pad to dull the gloss and give a key, wipe again, tack cloth. Masking: film and tape over the glass, tape along the gasket lines, masking of the brick reveal, sills and any render; on a bay or a window with bars the masking is the longest stage. Spraying: adhesion primer where the system requires it, then two or three topcoats at the datasheet thickness with flash-off between coats, inside face first where both are being done so the sash can be closed. De-masking and finishing: pull the masking while the last coat is still soft enough not to tear, refit the furniture, clean overspray.

For a plain casement, the split is roughly 15 minutes preparation, 15 minutes masking, 15 minutes spraying across the coats, 10 minutes de-masking and furniture: about an hour, which gives the 6–10 per day rate once setting up, moving, flash-off waiting and tidying are added. Georgian bars, leaded lights and bay windows push the masking to 30–45 minutes per window.

Building the per-window price

Take the day rate (£250–£400) and divide by the realistic output (6–10 windows a day) for the labour per window: £30–£60. Add materials at £8–£20. Add the masking consumables (£3–£6) and a share of the equipment: an HVLP turbine and gun at £400–£1,200 or an airless unit at £800–£2,500, the air-fed mask and compressor at £600–£1,500, all recovered over the year. Add travel and setting up (typically a half-day's labour for a house job split across the windows). The direct cost of a plain window comes to about £50–£90; the market price of £75–£150 gives a 30–50% margin on the smaller jobs and less on the larger. Price a whole house at the per-window rate less 10–15% for the saving in travel and set-up, never at a flat "house price" without a count.

A worked example: a three-bedroom semi with 11 standard windows, one bay (three sections), a front door and a back door, inside and out, anthracite. Windows 11 × £110 = £1,210; bay £350; doors 2 × £220 = £440; total £2,000. Labour is two people for three days (£1,650), materials for 16 openings at £15 (£240), masking and consumables (£80), tower hire (£100): direct cost £2,070, which is above the price. Recount: with a second person masking, the output rises to 14–18 openings a day, so the job is two days, labour £1,100, direct cost £1,520, and the £2,000 quote gives a 24% margin. The lesson is that the second person is what makes a house job pay; a lone sprayer should price a house at the top of the range or decline it.

Materials and systems

Use a coating system designed for PVC-U and follow its process. Two-pack polyurethane systems give the hardest, most solvent-resistant finish and the strongest manufacturer guarantees (commonly 10 years), but the hardener is an isocyanate. Water-based uPVC systems avoid the isocyanate, are easier to use inside an occupied house, and have improved to the point where several carry 5–10 year guarantees; they are slower to cure and more sensitive to cold and damp. Either way, the system's cleaner, primer (where used) and topcoat are specified together; mixing brands voids the guarantee and is the usual cause of adhesion failure.

Specify a solar-reflective formulation for dark colours on uPVC. A standard dark coating raises the frame surface temperature enough on a south-facing elevation to soften and bow the profile, and the first sign is a door that will not close in July. Most uPVC coating manufacturers offer a heat-reflective version of their dark colours at a premium of 10–25%; price it in and state it on the quote.

Health and safety: the cost that cannot be cut

Two-pack paints contain isocyanates; breathing the spray mist sensitises the lungs, and once sensitised a sprayer reacts to tiny exposures for life. HSE's position is that spraying isocyanate paints needs air-fed breathing apparatus (a visor or hood supplied with clean air from a compressor with a filter), not a half-mask with cartridges, and that this applies outdoors as well as in a booth. Add gloves, a disposable coverall and eye protection, a COSHH assessment, and health surveillance (lung function tests) for anyone spraying regularly. The air-fed kit costs £600–£1,500 and a few pounds a day in filters; it is part of the price of every job. Water-based systems reduce but do not remove the need for respiratory protection; a fine mist of any paint is a hazard, and the datasheet states the mask required.

Overspray is the other liability. A still morning carries fine mist 5–10 m; cars, neighbours' windows, garden furniture and paving need moving or covering, and a quote should state that the customer moves vehicles and that the sprayer will not work in wind above the system's limit. The public liability insurer must know that spraying is part of the business.

What changes the price

Guarantee and the quote wording

State the coating system and the manufacturer's guarantee period on the quote. State that the work is carried out to the system manufacturer's process and that the guarantee covers peeling, flaking and colour fade to the manufacturer's terms, and that the frame manufacturer's own guarantee on the windows may be affected by painting. State the weather conditions the work depends on and that dates may move. State that gaskets and seals are not coated (or are coated only where the system allows). State that handles and hinges are removed and refitted and that any hardware found to be broken is reported, not replaced, unless quoted. A quote that says these things in plain words is the difference between a complaint and a warranty call the system manufacturer deals with.

Frequently Asked Questions

How long does sprayed uPVC last?

A system applied to the manufacturer's process on sound, properly degreased and keyed frames lasts 10 years or more before it needs recoating, and most systems guarantee 5–10 years. The failures that occur are almost all preparation failures: silicone polish not removed, a frame keyed but not degreased, a water-based coating applied in a damp evening, or a dark colour without heat-reflective pigments on a south elevation. The second coat applied ten years later is a quick job because the surface is already a coating designed to be overcoated.

Does spraying void the window guarantee?

It can. Most window manufacturers' guarantees exclude damage caused by painting or coating the frames, and some exclude the whole guarantee once a frame is painted. The coating manufacturer's guarantee replaces it for the finish but not for the frame, the sealed units or the hardware. Tell the customer in writing before the work starts. On windows more than ten years old the frame guarantee has usually expired and the point is academic.

Is it cheaper to spray or replace uPVC windows?

Spraying a window at £75–£150 against replacing it at £650–£1,250 fitted is about a fifth of the price, with no Building Regulations notification, no FENSA certificate and no new sealed units. Replacement wins where the frames are failing (discoloured and brittle, cracked welds, dropped sashes that cannot be adjusted), where the sealed units have misted or the glass does not meet current U-values, or where the customer wants trickle vents, new hardware or a different style. A sound frame with a dated colour is a spraying job.

Can the customer be in the house during spraying?

Outside work, yes, with the windows closed and an agreement about cars, pets and washing. Inside work with a two-pack system needs the room cleared and well ventilated and the occupants out of it for the day, and the smell lingers overnight; a water-based system is the sensible choice for inside faces in an occupied house. Either way, keep the windows ajar on the first evening so the sashes do not stick to the frame.

Regulations & Standards