Summary

Plantation shutters are a high-ticket, high-margin window dressing that most customers buy from a national franchise at £400–£700 per m². An independent fitter who can survey accurately, order from a trade supplier and fit cleanly can undercut that by a third and still make a better margin than on most joinery. The risk is entirely in the survey: a shutter ordered 10 mm too wide for an out-of-square Victorian reveal is scrap, and the fitter pays.

This guide covers how the product is priced (per square metre by material and louvre size), what a trade supplier charges against what the customer expects to pay, the fitting time per window type, the survey method and the frame options that make an imperfect opening work, and the lead-time and deposit arrangements that protect the fitter's cash flow on a job where the supplier wants paying before the goods ship. For curtain poles and blinds, see curtain pole and blind fitting pricing guide; for the motorised alternative see smart blinds and curtains.

The misconception is that fitting is where the money is. Fitting a shutter into a frame that has been surveyed correctly takes an hour. The surveyed shutter is a product the fitter has designed; the design is what is being paid for.

Key Facts

Quick Reference Table

Spending too long on quotes? squote turns a 2-minute voice recording into a professional quote.

Try squote free →
Window Size Material Supplied and fitted (2026) Fitting time
Small bathroom window 0.6 m × 0.6 m (minimum charge) Waterproof PVC £200–£350 1 hour
Standard casement 1.2 m × 1.2 m (1.4 m²) MDF composite £300–£450 1–1.5 hours
Standard casement 1.2 m × 1.2 m (1.4 m²) Basswood painted £450–£650 1–1.5 hours
Large living-room window 1.8 m × 1.5 m (2.7 m²) MDF composite £550–£800 1.5–2 hours
Large living-room window 1.8 m × 1.5 m (2.7 m²) Hardwood £1,100–£1,750 2 hours
Bay window, three sections 3.5 m total × 1.5 m (5.3 m²) Basswood painted £1,700–£2,500 3–5 hours
Patio doors, tracked bifold shutters 2.4 m × 2.1 m (5 m²) Basswood £1,900–£3,000 4–6 hours, two people
Tier-on-tier, Victorian sash 1.0 m × 2.0 m (2 m²) Basswood £800–£1,200 2 hours
Café-style (lower half only) 1.2 m × 0.7 m (0.85 m²) MDF composite £220–£350 1 hour
Three-bedroom house, 8 windows About 12 m² MDF composite £3,000–£4,500 1.5–2 days
Three-bedroom house, 8 windows About 12 m² Basswood £4,200–£6,500 1.5–2 days

Detailed Guidance

How the product is priced

Trade suppliers quote per square metre by material, with a minimum area per window, and add for options: hidden tilt, special shapes (arches, triangles, circles), tracked systems for doors, mid-rails at a set height, custom colours and stains, and a solid-panel lower section. The fitter's selling price is the supply cost plus a mark-up of 40–80% plus the fitting, and the result lands in the per-square-metre bands above. A national franchise's price for the same product is £400–£700 per m² supplied and fitted; the independent fitter's room to undercut is wide.

Price per square metre of the window, not of the shutter; the customer understands the window size. Round every window up to the supplier's minimum and quote per window with a total, and keep the per-m² rate off the quote so a customer does not divide and compare.

Survey: the paid-for part

Measure the reveal width at the top, middle and bottom and the height at the left, centre and right. Record all six to the millimetre. Measure the diagonals; a difference over about 8 mm means the opening is out of square and either the frame's adjustment must cover it or an outside-mount frame is needed. Measure the reveal depth at the top and bottom and at the handles, and check the window handle's swing: a handle that stands proud of the frame by 60 mm needs a build-out or a larger frame section, or the louvres will hit it. Note the tiles, sills and architraves that intrude, the position of the window's opening sashes (the shutter's panel splits should align with the sash splits so the window can be opened with a panel folded back), and whether the room is a first-floor bedroom with an escape window.

For a bay, measure each section as its own window and take the angle between sections with a digital angle finder; the supplier makes the angled posts to the figure given. For a tracked set across doors, measure the clear height to the ceiling or the track position and the floor level across the opening.

Decide the frame: inside mount with an L-frame where the reveal is square and deep; a Z-frame where the plaster edge is rough and needs covering; outside mount where the reveal is shallow, out of square, or the customer wants the shutter to look bigger than the window. Decide the louvre size against the panel height (63 mm on a panel under 1.2 m, 76–89 mm on a taller panel) and the tilt type. Confirm the colour against the supplier's swatch in the room's light. Write all of it on the order form and have the customer sign the configuration (number of panels, louvre size, colour, tilt, mid-rail height, frame) before it goes to the supplier. A signed configuration is what settles the "I thought it would have a bar in the middle" conversation.

Fitting

Unpack and check the shutters against the order on delivery, before the fitting day, so a wrong panel is reordered without a wasted visit. On the day: assemble the frame (most are mitred corners with keys or screws), offer it into the reveal, pack and level it, and screw through the frame into the reveal at 300–400 mm centres and within 100 mm of each corner, with the screw heads under the supplied cover strips. Hang the panels on their hinges, adjust the hinge pins and the magnets so the panels close flush and the louvres meet, fit the cover strips, caulk any gap between frame and plaster with a decorator's caulk and touch up with the supplied paint.

A standard single window is an hour to ninety minutes. A bay of three sections with two angled posts is three to five hours because the posts have to be plumb and the frames aligned across the sections. A tracked bifold set across doors is four to six hours with two people: the track has to be level to the millimetre or the panels bind.

Fixings depend on the reveal: plaster over masonry takes plugs and 40–50 mm screws; a timber-lined reveal takes wood screws; a plasterboard reveal on dabs takes frame fixings through to the masonry. Where the reveal is the uPVC window frame itself (a flush-fitted window with no plaster reveal), fix into the outer frame only where the supplier's instructions allow, keep the screws short, and stay 50 mm clear of the glass line to avoid the sealed unit.

What changes the price

Lead time, deposit and cash flow

Made-to-measure shutters are paid for at order by the fitter and arrive six to twelve weeks later. Take a 50% deposit from the customer at order, with the balance on the day of fitting, and put the lead time and the payment terms on the quote. A made-to-measure product is exempt from the 14-day cancellation right in the Consumer Contracts Regulations 2013, but only if the quote says so and the goods are made to the customer's specification; state it. Keep the deposit in a separate account until the supplier is paid.

A reorder for a surveying error is the fitter's cost: a £400 panel and six weeks. Build a 3–5% allowance into the pricing across the year for it, and measure twice.

Worked example

Three-bedroom semi: living-room bay (three sections, 1.1 m + 1.4 m + 1.1 m wide × 1.5 m high, 5.4 m²), dining-room window (1.5 m × 1.3 m, 1.95 m²), three bedroom windows (1.2 m × 1.2 m, 1.44 m² each), bathroom (0.6 m × 0.9 m, 0.54 m², minimum 0.6 m²). Total 12.2 m², basswood painted white with 76 mm louvres and hidden tilt, bathroom in waterproof PVC.

Frequently Asked Questions

What is the difference between a franchise price and an independent fitter's price?

The product is often the same factory. A franchise prices at £400–£700 per m² supplied and fitted because it carries a showroom, a sales visit, national advertising and a royalty. An independent fitter buying from a trade supplier at £90–£400 per m² and fitting for £80–£150 a window can sell at £180–£650 per m² and keep a 25–40% margin. The independent's risk is the survey; the franchise has a surveyor whose mistakes the company pays for.

Can shutters be fitted on a uPVC window?

Yes, and most are. The shutter frame fixes into the plaster reveal around the window, not the uPVC, where there is a reveal. On a flush window with no reveal the frame fixes to the wall face (outside mount) or, where the supplier's instructions permit, to the outer uPVC frame with short screws kept well clear of the glass. The window handle's clearance decides the frame depth, and tilt-and-turn windows that open inwards need the panels to fold clear or an outside mount deep enough to allow the sash to swing.

Do plantation shutters need to meet the blind cord safety rules?

No. BS EN 13120:2009+A1:2014 and the General Product Safety Regulations 2005 require cord and chain safety devices on internal blinds because of the strangulation risk to young children. Shutters have no cords or chains; the louvres are tilted by a rod or by hand. That is one of the reasons they sell for nurseries and children's bedrooms, and it is worth saying on the quote.

How long do plantation shutters take to arrive?

UK-made MDF composite shutters are usually 3–5 weeks from order; most basswood and hardwood shutters are made in China or Southeast Asia and take 6–12 weeks by sea freight. Air freight is available from some suppliers at a premium for an urgent job. A reorder for a wrong panel takes the same time again, so the survey and the signed configuration matter more than the fitting.

Regulations & Standards