Summary
Resealing is the bathroom job that every plumber, tiler and handyperson is asked for and almost nobody prices properly. The customer sees a black line of mould along the bath and expects £40; the job is three hours of cutting out, scraping, cleaning, drying, masking, sealing and tooling, and if the silicone is applied over the damp residue of the old one it fails in six months and the customer is back. A reseal is a small job with a high callback rate, and the price has to cover doing it once.
This guide prices the job by fixture and as a whole-bathroom visit, covers the labour sequence and where the time goes, the materials and why the cheap cartridge costs more, what the stripped-out seal reveals (and how to quote for it), and the quote wording that protects a tradesperson when the leak was never the silicone. For re-grouting, which is often sold with a reseal, see re grouting pricing guide; for the sealant chemistry see sealant types.
The pricing misconception is that silicone is a product. It is a process: remove, clean, dry, apply, tool, cure. Half of the process is waiting, and waiting is what the customer is paying for when the seal lasts five years instead of six months.
Key Facts
- Minimum call-out — £150 for any reseal visit; it is a half-day once travel, set-up, drying time and tidying are counted.
- Bath — £80–£150 for a standard 1,700 mm bath against two or three walls (about 3.5–4.5 m of seal, two sides where the bath is in an alcove).
- Shower tray and enclosure — £90–£160 for a tray to the walls plus the enclosure frame to the tray and walls (4–7 m of seal, more fiddly).
- Basin, worktop or vanity — £40–£80 (1–2 m).
- WC base or pedestal — £25–£45 (1–1.5 m).
- Whole bathroom — £150–£250 for bath, tray, basin and WC in one half-day visit; £250–£400 where mould stripping, a bath re-fix or an enclosure re-seat is needed.
- Per metre rate — £8–£18 per linear metre for strip and reseal, used for large or awkward jobs.
- Labour — £40–£60 an hour; a bath reseal is 1.5–2.5 hours of work plus cure time; a full bathroom 3–4 hours.
- Sealant — sanitary-grade silicone with a fungicide, neutral-cure (alkoxy or oxime) for use against acrylic, natural stone, mirrors and metal; acetoxy cure is acceptable on ceramic and glass but corrodes some metals and attacks some acrylics. 310 ml cartridges at £6–£14; a bath takes most of one cartridge, a bathroom two.
- Classification — BS EN ISO 11600 class F-25-LM (façade, 25% movement, low modulus) is the reference for a flexible joint; BS EN 15651-3 covers sealants for sanitary joints and is the CE/UKCA-marked classification on the cartridge (class S or XS).
- Joint size — a sanitary joint should be at least 5 mm wide and no deeper than it is wide; a gap over 8–10 mm needs a backer rod or a bath seal trim, not more silicone.
- Bath weight — fill the bath to the overflow before sealing so the joint is formed with the bath at its loaded position; a bath sealed empty opens the joint every time it is filled.
- Bath support — a bath that moves more than 2–3 mm when leant on will break any seal; it needs re-fixing to the wall with brackets or a batten and the feet adjusting; price it as a separate item (£60–£120).
- Drying — the cut-out joint must be dry before sealing; a bathroom used that morning needs a fan or a heat gun on the joint; ideally the bathroom is unused for 24 hours before and 24 hours after.
- Cure — skin in 10–30 minutes, usable after 24 hours, full cure 3–7 days depending on depth and humidity; no showers for 24 hours is the standard instruction.
- Mould — a mould stain on a stripped joint is removed with a chlorine-based cleaner or a dedicated mould remover, rinsed, and dried; a mould-stained old seal is never overcoated.
- Tools — a sealant removal tool or a sharp blade to cut both faces, a plastic scraper, silicone remover gel (£5–£10) for residue, isopropyl alcohol or methylated spirit for the final wipe, masking tape, a profiling tool.
- Enclosure seals — the enclosure frame seals to the tray and to the wall on the outside only; the inside of the frame-to-tray joint is left open so water trapped in the frame drains to the tray. Sealing both sides traps water and the enclosure leaks at the floor.
- Upstands and trims — a bath or tray with an upstand should be sealed to the tiles over the upstand, not at the top edge only; a bath seal trim (£10–£25) is the answer for a gap over 10 mm or a bath that cannot be sealed flush.
- Leaks — a leak at the floor below a bath is usually the waste, the trap or the overflow, not the silicone; state in the quote that the reseal does not guarantee a leak is fixed unless the seal was the cause.
- VAT — standard 20%.
Quick Reference Table
Spending too long on quotes? squote turns a 2-minute voice recording into a professional quote.
Try squote free →| Item | Seal length | Labour | Materials | Price (2026) |
|---|---|---|---|---|
| Bath, two sides (alcove) | 3.5–4.5 m | 1.5–2.5 hours | £10–£20 | £80–£150 |
| Bath, three sides | 5–6 m | 2–3 hours | £15–£25 | £110–£180 |
| Shower tray to walls | 2–3 m | 1–1.5 hours | £8–£15 | £60–£110 |
| Shower tray and enclosure frame | 4–7 m | 2–3 hours | £15–£30 | £90–£160 |
| Basin or vanity worktop | 1–2 m | 0.5–1 hour | £5–£10 | £40–£80 |
| WC base or pedestal | 1–1.5 m | 0.5 hour | £3–£6 | £25–£45 |
| Kitchen sink and worktop to tiles | 2–4 m | 1–1.5 hours | £8–£15 | £60–£110 |
| Whole bathroom (bath, tray, basin, WC) | 10–14 m | 3–4 hours | £25–£45 | £150–£250 |
| Whole bathroom plus mould stripping and bath re-fix | 10–14 m | 4–6 hours | £40–£70 | £250–£400 |
| Per linear metre, strip and reseal | — | — | — | £8–£18 |
| Minimum call-out | — | Half-day | — | £150 |
Detailed Guidance
The job sequence and where the hours go
A bath reseal in order: protect the floor and the bath surface; cut along both faces of the old silicone with a sealant removal tool or a fresh blade held flat to the tile and the bath so neither is scored; pull the bead out; scrape the residue; apply a silicone remover gel and leave it 15–30 minutes; scrape again and wipe with isopropyl alcohol; treat any mould on the tile edge and grout; dry the joint with a cloth and a fan or a heat gun on low; fill the bath to the overflow; mask both sides of the joint with tape 5–6 mm apart; cut the nozzle to the joint width; gun the bead in one continuous pass per run; tool it with a profiling tool or a wetted finger within the skin time; pull the tape while the bead is wet; wipe the edges; leave the bath full for at least an hour, then drain; no use for 24 hours.
For a 1,700 mm bath in an alcove: cutting out 20–30 minutes, residue and cleaning 30–40 minutes, mould and drying 15–30 minutes, masking 15 minutes, sealing and tooling 15–20 minutes, tidy 15 minutes: about two hours of work. Add the travel and the 24-hour instruction and it is a half-day; the £150 minimum covers it.
A shower enclosure adds the frame: the old seal on the outside of the frame to the tray and to the wall is cut out and replaced; the inside of the frame-to-tray joint is checked to be open and cleared if a previous installer sealed it; the glass-to-frame seals are usually a rubber or plastic strip, not silicone, and are replaced as a part (£10–£30) if they are split.
Materials: why the cheap cartridge costs more
A trade sanitary silicone at £8–£14 a cartridge has a fungicide that lasts, a neutral-cure chemistry that does not attack acrylic baths or corrode chrome, and a low modulus that moves with the bath. A general-purpose silicone at £3–£5 has a weaker or no fungicide, is often acetoxy (vinegar smell), and goes black in a year. The customer who had the cheap one is the customer who is calling now. Specify the product on the quote (sanitary, neutral-cure, with fungicide, to BS EN 15651-3 class S) so the customer can see the difference between the quote and the £40 offer.
Colour matters: most baths and trays are white and the silicone should be white, not clear (clear shows the dirt behind it and the mould through it). Anthracite, grey and black silicones are available for dark tiles and matching grout; they cost a little more and the customer should choose from a chart.
Count on a cartridge per bath or tray at a 6–8 mm bead, two for a bathroom, with a cartridge of remover gel and a litre of isopropyl alcohol lasting several jobs.
What the stripped joint reveals, and how to quote for it
Cutting out the old seal is a survey. Common findings and the extras they justify:
- Loose bath: the bath moves against the wall; it needs the feet adjusting and brackets or a batten fixed to the wall under the rim; £60–£120 extra, and without it the reseal is pointless.
- Tray not sealed under the upstand or tray moving: a tray with no bedding that flexes will break the seal and often leaks at the waste; a re-bed is a bathroom fitter's job at £150–£300 and should be quoted, not absorbed.
- Gap too wide: a bath 15 mm from a wall after a tiling job; a backer rod and a bath seal trim, £15–£40 in parts plus an hour.
- Water behind the tiles: tiles that sound hollow along the bath edge, or grout that is soft and brown; the water has been getting behind the tiles and the wall may be wet; a reseal will hide it for a season. Tell the customer and quote the investigation.
- Mould on the wall or in the grout: strip and treat; where the grout is black through, regrout the bottom two courses (see re grouting pricing guide).
- Previous seal over seal: two or three layers of old silicone, the last one applied over the first by a previous "quick fix"; cutting it all out doubles the time and should be charged at the per-metre rate.
Put a line on the quote: "Price assumes the bath, tray and enclosure are secure and the surfaces sound. Any re-fixing, re-bedding, regrouting or tile repair found on removal of the old sealant will be quoted before proceeding."
Drying and curing: the time nobody wants to pay for
Silicone applied to a damp joint does not bond. A bathroom that was showered in that morning has a damp joint; a bathroom with an extract fan that does not work has a damp joint all day. The two options are to dry the joint with a fan or heat gun and wait (30–60 minutes on a dry day, longer in winter) or to ask the customer not to use the bathroom for 24 hours before the visit. Either way, the job is one visit with a half-day on site and a 24-hour no-use period afterwards, and the price must reflect that a bath reseal cannot be done in the hour between two other jobs.
The cure instruction on the quote: no water on the seal for 24 hours; full strength after 3–7 days; do not pull the tape or test the seal early.
Pricing a whole bathroom and the reseal-plus-regrout bundle
A whole-bathroom reseal (bath, tray and enclosure, basin, WC base) is 10–14 m of seal and a 3–4 hour visit: £150–£250 is the market, and it is the better job to sell than a bath on its own because the travel and set-up are spread. The reseal-plus-regrout bundle (strip and regrout the bottom two courses around the bath and tray, then reseal) is a full day at £350–£550 and resolves the complaint that the mould is in the grout not the silicone. See the regrouting guide for the per-m² rates; the combined price should be a little less than the two separately.
Worked example
Customer wants the bath and the shower enclosure resealed; black mould along the bath, enclosure leaking at the floor. Survey finds the bath secure, the enclosure frame sealed inside and out by a previous fitter (trapping water), one hollow tile at the tap end.
- Labour: 3.5 hours at £50 = £175 (bath strip and reseal 2 hours, enclosure strip, clear the inside joint, reseal outside 1.25 hours, tidy and instructions 0.25).
- Materials: two cartridges sanitary neutral-cure white £22, remover gel and cleaning £6, masking £3, mould treatment £4 = £35.
- Direct cost £210; at 20% margin the price is £252; quote £250 plus VAT with the hollow tile noted and a regrout of the bath edge quoted separately at £60, and the enclosure leak explained (the inside seal was the cause, not the silicone at the wall). Within the £250–£400 band for a bathroom with an enclosure problem.
Frequently Asked Questions
Why does resealing a bath cost more than the silicone?
Because the silicone is the last 15 minutes of a two-hour job. Cutting the old seal out without scratching the bath or the tiles, dissolving and scraping the residue, treating the mould, drying the joint, masking, filling the bath, applying and tooling the bead and pulling the tape all come before and after it, and a reseal that skips them fails in months. The £150 minimum is a half-day's work plus the 24 hours the bathroom is out of use.
Can new silicone be applied over the old?
No. Silicone does not bond to cured silicone, and the mould in the old seal grows through the new one. Every reseal is a strip and replace. A customer who asks for a quick bead over the top should be told why it will not last and offered the proper job; a tradesperson who does it anyway owns the callback.
Will resealing fix a leak through the ceiling below?
Only if the seal was the leak, and it usually is not. Water that reaches the ceiling below a bath is more often from the waste and trap, the overflow, a split supply connector or the tray's waste; a failed seal between bath and wall lets water run down the wall behind the tiles and it shows as damp on the wall or the floor at the back of the bath. Check the waste with the bath filled and drained while watching below before quoting; a reseal sold as a leak fix is a complaint waiting to happen.
How long should a bathroom seal last?
A properly applied sanitary silicone on a secure bath with a working extractor lasts five to ten years before the fungicide is exhausted and mould takes hold. Two years or less means something else is wrong: a bath or tray that moves, a joint sealed damp, a cheap sealant, a bathroom with no ventilation, or water getting behind the seal from above. The reseal is the time to find it.
Regulations & Standards
BS EN ISO 11600 — Building construction. Jointing products. Classification and requirements for sealants (class F-25-LM for flexible low-modulus joints)
BS EN 15651-3 — Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for sanitary joints; the UKCA/CE classification on the cartridge
BS 5385-1:2018 — Wall and floor tiling. Design and installation of ceramic, natural stone and mosaic wall tiling in normal internal conditions; movement joints and the junction with sanitaryware
BS 5385-4:2015 — Design and installation of ceramic and mosaic tiling in specific conditions; wet areas
Building Regulations 2010, Approved Document F Volume 1 — extract ventilation rates for bathrooms (15 l/s intermittent), the reason many seals fail early
Building Regulations 2010, Approved Document G — sanitary conveniences and bathrooms
Control of Substances Hazardous to Health Regulations 2002 — chlorine-based mould removers and solvent cleaners; ventilation and gloves
Approved Document F, Volume 1: Dwellings (2021 edition) — bathroom extract rates
The Tile Association — technical guidance — junctions between tiling and sanitaryware, wet-area tiling
British Adhesives and Sealants Association — sealant selection and application guidance
HSE — COSHH essentials — safe use of cleaning chemicals and solvents
Bathroom Manufacturers Association — installation and care guidance for baths, trays and enclosures
re grouting pricing guide — regrouting rates and the reseal-plus-regrout bundle
sealant types — which sealant for which joint, and the BS EN ISO 11600 classes
grout repair — repairing grout along the bath and tray edge
bath replacement pricing guide — when the bath, not the seal, is the problem
bathroom suite installation pricing guide — full bathroom installation pricing
toilet types — WC bases and pedestals being sealed