Summary
Roofing is priced per square metre by almost everyone and lost on by anyone who prices the square metre without first knowing their day rate. The customer compares £80/m² with £65/m² for "a new roof" and takes the £65, not knowing that it excludes the scaffold, the skip, the battens, the membrane, the lead to the chimney, the dry verge and the three days of rain in which nobody was paid. The roofer who quoted £65 then either does all of that for nothing or has a conversation on the scaffold. The alternative is to build the price from the day rate, which carries the real costs of a trade that works outside, at height, with heavy materials and a shorter season, converted to a per-metre labour figure for each covering at the output that covering actually achieves, with the scaffold, skip, materials and leadwork as separate priced lines.
Roofing output and costs are different from indoor trades in three ways the day rate has to carry. The weather: 170–200 billable days a year is realistic, not the 200–215 of a plasterer or tiler. The access: every job needs a ladder, a roof ladder, edge protection or a scaffold, and the scaffold is £600–£1,500 of someone else's money on every re-roof. The materials: tiles are heavy (40–55 kg/m² for plain tiles), slate is expensive and variable, and a re-roof involves battens, membrane, nails, clips, dry-fix systems, lead, ventilation and insulation, all at trade cost plus margin. This guide builds the day rate from 2026 costs, gives the regional figures, converts the rate to per-metre labour by covering at realistic outputs, prices the repairs and the leadwork, shows a worked semi-detached re-roof, and sets out the Part L and work-at-height points that every roofing quote has to cover. For the method across all trades see pricing labour; for converting day and hourly rates see day rate to hourly rate calculator; for the per-job detail see roof repair pricing guide, slate roof pricing guide and flat roof replacement pricing guide.
Key Facts
- Day rate, 2026 — £220–£320 regionally; £260–£380 South East; £320–£450 London. Top of range for slaters, lead specialists and heritage work
- Gang rate — two roofers and a labourer £650–£950 a day regionally, £900–£1,300 London; the labourer at £130–£180 a day (see pricing labour for labourer rates)
- Hourly equivalent — £35–£65, derived by dividing the day rate by 6.5–7 billable hours; used for repairs and for working for a main contractor
- Billable days — 170–200 a year; weather (rain, wind over 23 mph on a roof, frost on slates), quoting, collecting materials, scaffold waiting
- Strip and re-tile, interlocking concrete, labour — £35–£60/m²; output 20–30 m² a day per roofer including strip, membrane and battens
- Strip and re-tile, plain clay or concrete tiles, labour — £50–£90/m²; output 12–18 m² a day (60 tiles/m² against 10 for interlocking)
- Strip and re-slate, natural slate, labour — £60–£110/m²; output 10–15 m² a day; Welsh or Spanish slate graded and holed on site adds time; see natural slate roofing
- Fibre-cement slate — £45–£75/m² labour; faster than natural slate, pre-holed
- Overlay or re-batten only — rarely acceptable; stripping to the rafters is the norm for a re-roof and is what BS 5534 assumes
- Materials, supply and fit per m², typical total — interlocking concrete £80–£130/m²; plain tile £110–£180/m²; natural slate £130–£220/m²; all including battens, breathable membrane, fixings, dry ridge and verge, ventilation; excluding scaffold, skip and lead
- Scaffold — £600–£1,500 for a semi-detached house (front and back, 6–8 weeks hire), £1,200–£2,800 for a detached; a disbursement at cost plus 10% or a separate line; see scaffolding pricing guide
- Skips — strip waste is 40–55 kg/m² for tiles, 25–35 kg/m² for slate; an 8-yard skip (£280–£400) takes about 25–35 m² of old tiles; old slates with resale value reduce the skip bill
- Leadwork — chimney flashings £250–£500 per chimney (Code 4 step and cover, back gutter, apron), valleys £60–£110 per metre, lead to Code 4 or 5 per BS EN 12588 and the LSA manual; see lead work
- Repairs, half-day minimum — £150–£250 regionally; slipped tiles, a cracked ridge, a lead patch; the ladder, the roof ladder and the risk assessment are the same for one tile as for twenty; see roof repair pricing guide
- Flat roofing — GRP £60–£100/m² supplied and fitted, EPDM £50–£90/m², torch-on felt £40–£80/m²; priced per job with the deck, insulation and outlets as lines; see flat roof replacement pricing guide
- Part L — replacing more than 50% of the roof covering is a renovation of a thermal element; Approved Document L Volume 1 requires the roof's insulation brought to 0.16 W/m²K (insulation at ceiling, 270 mm mineral wool), 0.18 W/m²K at rafter level or on a flat roof, where practicable; notifiable to Building Control or self-certified through a competent-person scheme (CompetentRoofer or equivalent)
- Work at Height Regulations 2005 — the scaffold with edge protection is the default for any re-roof; a ladder is for access and short-duration light work only; a roof ladder hooked over the ridge for a repair with the risk assessed
- CDM 2015 — a re-roof is construction work; the roofer is the contractor; a construction phase plan (one page for a domestic re-roof) is required
- Insurance — public liability £2–£5 million, £900–£1,800 a year (roofers pay more); employers' liability if a labourer is employed
- VAT — compulsory registration above £90,000; a roofer supplying tiles and scaffold reaches it on a modest labour turnover
- CIS — 20% deducted at source on labour when working for a contractor; 30% if not registered; see cis tax explained
- Materials markup — 15–25% on tiles, slates, battens, membrane, fixings, dry-fix, lead and ventilation; delivery and crane-off at cost plus 10%
- Consumer Rights Act 2015, s.51 — reasonable price where none agreed; a written per-metre rate with the scaffold, skip, lead and Part L insulation stated is the contract
Quick Reference Table
Spending too long on quotes? squote turns a 2-minute voice recording into a professional quote.
Try squote free →| Charge | Regional (outside London/SE) | South East | London | Notes |
|---|---|---|---|---|
| Day rate, roofer, own tools | £220–£320 | £260–£380 | £320–£450 | 6.5–7 billable hours |
| Gang (2 roofers + labourer) | £650–£950 | £750–£1,100 | £900–£1,300 | Per day |
| Hourly equivalent | £35–£50 | £40–£58 | £50–£65 | Repairs, contractor work |
| Half-day minimum, repair | £150–£250 | £180–£280 | £220–£350 | Includes ladder/roof ladder |
| Strip and re-tile, interlocking concrete, labour per m² | £35–£60 | £42–£70 | £50–£85 | 20–30 m²/day/roofer |
| Strip and re-tile, plain tile, labour per m² | £50–£90 | £58–£100 | £70–£120 | 12–18 m²/day |
| Strip and re-slate, natural slate, labour per m² | £60–£110 | £70–£125 | £85–£150 | 10–15 m²/day |
| Interlocking concrete, supply and fit per m² (excl. scaffold, skip, lead) | £80–£130 | £95–£150 | £110–£180 | Incl. battens, membrane, dry-fix |
| Plain tile, supply and fit per m² | £110–£180 | £125–£200 | £150–£240 | |
| Natural slate, supply and fit per m² | £130–£220 | £150–£250 | £180–£300 | Spanish at low end, Welsh at high |
| Chimney re-flash, Code 4 lead | £250–£500 | £300–£580 | £350–£700 | Per chimney, from scaffold |
| Valley, lead, per metre | £60–£110 | £70–£125 | £85–£150 | Code 5 |
| Dry ridge system, per metre supplied and fitted | £25–£45 | £28–£50 | £35–£60 | BS 5534 mechanical fixing |
| Dry verge, per metre supplied and fitted | £15–£30 | £18–£35 | £22–£42 | |
| Scaffold, semi-detached (disbursement) | £600–£1,500 | £800–£1,800 | £1,000–£2,500 | 6–8 weeks |
| Skip, 8 yd | £280–£400 | £320–£450 | £380–£550 | Per 25–35 m² of tiles |
| Semi-detached re-roof, 80 m², interlocking concrete, all-in | £8,000–£13,000 | £9,500–£15,000 | £11,500–£18,000 | See worked example |
Detailed Guidance
Building the day rate from your costs
A sole-trader roofer outside London:
| Item | Annual figure |
|---|---|
| Target income before tax | £38,000 |
| Van (3.5 t with roof rack and tipping body or trailer): finance or depreciation, insurance, tax, servicing, fuel | £8,000 |
| Public liability insurance, £2–5 million | £1,200 |
| Tools: roof ladders, ladders, tile cutter, slate cutter, lead tools, nail guns, compressor, harness and anchor, replacement | £2,000 |
| Consumables not recharged: blades, nails, gas, lead sealant, chalk, PPE | £800 |
| Phone, accountant, software, card fees | £1,800 |
| Workwear, PPE, harness inspection, working-at-height refresher, CSCS | £700 |
| Advertising, website, directory listings, trade body membership | £1,500 |
| Pension contribution | £2,400 |
| Total to recover | £56,400 |
A roofer working 46 weeks and losing a day and a half a week to weather, quoting, materials and scaffold delays has about 185 billable days. £56,400 ÷ 185 = £305 a day to earn £38,000 before tax. At £220 a day the income before tax is about £22,000; at £320 it is about £41,000. That is why roofers who quote £200 a day are either young, or subsidised by a partner's income, or about to leave the trade.
Materials are not in the table. Tiles, slates, battens, membrane, fixings, dry-fix, lead, ventilation and insulation go on the quote at trade cost plus 15–25%; the scaffold and skip at cost plus 10% or as disbursements. A roofer who "throws in" the dry verge on a £260 day is giving away £150.
Converting the day rate into per-metre labour
The per-metre figure is the day rate divided by realistic output, with an uplift for the strip, the setting out, the cutting at hips, valleys and abutments, and the detailing at eaves, verge and ridge:
| Work | Realistic output per roofer per day | Day rate £305 ÷ output | Charged, labour only |
|---|---|---|---|
| Strip old tiles, felt and battens; bag and chute to skip | 40–60 m² | £5–£8 | £8–£12/m² |
| Lay breathable membrane and 25 × 50 mm battens at gauge | 50–80 m² | £4–£6 | £6–£10/m² |
| Lay interlocking concrete tiles, clipped to BS 5534, straight gable-to-gable | 25–35 m² | £9–£12 | £15–£22/m² |
| Lay interlocking tiles, hipped roof with two valleys | 15–22 m² | £14–£20 | £22–£32/m² |
| Lay plain tiles, double-lap, 100 mm gauge | 12–18 m² | £17–£25 | £28–£45/m² |
| Lay natural slate, graded, holed, nailed to BS 5534 | 10–15 m² | £20–£31 | £35–£55/m² |
| Dry ridge and hip system | 25–35 lin m | £9–£12 | £12–£18/lin m |
| Dry verge | 40–60 lin m | £5–£8 | £7–£12/lin m |
Strip plus membrane and battens plus tiling, with the detailing, is where the £35–£60/m² for interlocking concrete comes from, and the £60–£110/m² for slate. The charged figures are above the simple division because the outputs are for the activity only; a roofing day includes loading out from the scaffold, the chute, the cutting at every abutment with a wet saw and a mask (silica, see silica dust), and the half-hour lost at each end of a wet day. Where the per-metre total on a small roof falls below two days of gang rate, charge the day rate.
Pricing repairs: the half-day minimum
Most roofing calls are repairs: slipped tiles, a cracked ridge tile, a lead apron lifted by wind, a valley leaking, a broken slate. The work is twenty minutes; the job is two hours, because the ladder goes up, the roof ladder goes over the ridge, the risk is assessed, the match is found and the ladder comes down. Price every repair at a half-day minimum (£150–£250) that includes the first hour on the roof and the first few replacement tiles, with a stated per-item rate beyond that. A repair that needs a scaffold tower (chimney, anything over a conservatory) is a day plus the tower hire (£80–£150). The customer who objects to £180 for "one tile" is told what the alternative was: the roofer on a ladder on a wet day, which the Work at Height Regulations and your insurer both forbid. See roof repair pricing guide and pitched roof repairs.
Leadwork, chimneys and the specialist uplift
Lead is priced by the piece, not the metre of roof: a chimney with a front apron, stepped side flashings and a back gutter in Code 4 lead is £250–£500 from a scaffold, and more where the brickwork needs raking out and repointing. Valleys in Code 5 are £60–£110 a metre. A roofer competent in lead charges at the top of the day-rate band; a roofer who is not brings in a leadworker at £280–£400 a day and marks it up. Lead sheet is to BS EN 12588, the details to the Lead Sheet Training Academy manual, and the price moves with the metal price (check on the day of the quote). See lead work and chimney repairs.
Worked example: semi-detached re-roof, interlocking concrete
Two-storey semi, gable to the side, 80 m² of roof in two slopes, one chimney on the party wall, no valleys, existing concrete interlocking tiles from the 1970s with bitumen felt and no ventilation. Customer wants a like-for-like re-roof with new tiles, breathable membrane, dry ridge and verge, chimney re-flashed, and the loft insulation topped up to meet Part L.
Scaffold, front, rear and gable, 7 weeks (disbursement +10%) = £1,320
Skips, 3 × 8 yd (3.2 t of old tiles, felt, battens) = £990
Strip, 80 m² × £10 = £800
Breathable membrane and 25 × 50 mm treated battens,
80 m² × £8 = £640
Lay interlocking concrete tiles, clipped to BS 5534,
80 m² × £19 = £1,520
Dry ridge, 9 lin m × £15 = £135
Dry verge, 2 × 7 lin m × £9 = £126
Eaves: over-fascia vent, eaves protector, comb filler, 2 × 8 m = £200
Chimney: Code 4 apron, steps, back gutter, repoint 2 courses = £420
Materials (tiles 80 m² + 5%, membrane, battens, clips, nails,
dry ridge, dry verge, eaves kit, lead, sealant)
£3,180 + 20% = £3,816
Loft insulation top-up 100 → 270 mm, 60 m² × £11 (Part L) = £660
Building Control: competent-person scheme notification = £60
Crane-off / delivery = £120
--------
Quote £10,807
Programme: 8–9 working days, 2 roofers + labourer, weather
permitting; scaffold up 1 week before, down 1 week after
The labour lines total £3,841 for roughly 9 gang-days, which is £427 a day against a gang rate of £650–£950, so the quote is under-recovering labour on a straight gable roof and would be adjusted up (to £20–£24/m² on the tiling and £12/m² on the strip) or the programme tightened to 6–7 days, which a good gang achieves on an 80 m² gable-to-gable roof. That reconciliation, labour lines against gang-days, is the check to run on every re-roof quote before it goes out.
When to use the day rate instead
- Working for a main contractor — the builder sets the programme, supplies the scaffold and the materials; agree a day rate (£200–£280 regionally in 2026) or an hourly rate, the start time, and a half-day charge for a wasted visit when the scaffold is not up. CIS applies
- Storm damage and insurance work — the insurer wants an itemised estimate; price the emergency make-safe at the call-out rate (£150–£300 for a tarpaulin and a visit) and the repair at the half-day or per-item rates; see emergency boarding up pricing guide
- Investigation — a leak that nobody can find is an hourly or half-day job with a roof walk, a hose test and a report; see pitched roof leak tracing
- Chimney removal, dormer re-covering, velux fitting — priced per job from the day rate and the materials, with the scaffold
Regional, London and seasonal factors
The spread from the cheapest regions to London is 40–50%, and London adds parking, ULEZ on older vans, slow travel and dearer scaffold and skips. The season is March to October for re-roofs; a roofer who is booked two months ahead in summer and takes repairs in winter is at the top of the band in both. Slate areas (Wales, the Lake District, Cornwall, Scotland) have their own rates and their own materials; a Welsh slate roof in Snowdonia and a Spanish slate roof in Surrey are different jobs with different day rates behind them. See slate vs concrete tiles.
Quoting, deposits and payment
Written quote for every job with the covering by name, the membrane and batten specification, the fixing specification (BS 5534 clips and nails, which the tile manufacturer's fixing calculation for the site's wind zone determines), the dry-fix or mortar-bedded ridge and verge, the lead code and detail, the ventilation, the Part L insulation, the scaffold and skip as lines, the programme, the weather clause, and the day rate for extras (rotten rafter ends, a chimney that needs taking down to the roofline, a second layer of tiles under the first). Materials deposit of 25–40% on anything over £2,000, a stage payment when the roof is stripped and membraned, and the balance on completion with a 7-day term. The Consumer Contracts Regulations 2013 give a 14-day cancellation right on contracts agreed in the customer's home; see quotes vs estimates and written quote template.
Frequently Asked Questions
What is a fair day rate for a roofer in 2026?
£220–£320 a day outside London and the South East for a self-employed roofer with their own tools, £320–£450 in London, and £650–£950 a day for a two-roofer-and-labourer gang regionally. Those figures give a high-£30,000s income before tax on about 185 billable days once the van, tools, insurance and pension are paid. A roofer working for a main contractor is lower (£200–£280) because the scaffold, materials and programme are the contractor's.
How much do roofers charge per square metre?
For labour only, £35–£60/m² to strip and re-tile with interlocking concrete tiles, £50–£90/m² for plain tiles and £60–£110/m² for natural slate, outside London in 2026. Supplied and fitted, including battens, membrane and dry-fix but excluding scaffold, skips and lead, £80–£130/m² for interlocking concrete, £110–£180/m² for plain tile and £130–£220/m² for natural slate. The scaffold adds £600–£1,500 on a semi and the skips £300–£400 each.
How many square metres can a roofer lay in a day?
25–35 m² of interlocking concrete tiles on a straight gable-to-gable roof, 15–22 m² on a hipped roof with valleys, 12–18 m² of plain tiles and 10–15 m² of natural slate, per roofer, with a labourer loading out. Stripping is 40–60 m² a day. A gang of two and a labourer re-roofs an 80 m² semi in 6–9 working days depending on the covering, the detailing and the weather.
Why is the scaffold on the quote? Can't you use ladders?
No. A re-roof is work at height for days at a time with heavy materials, and the Work at Height Regulations 2005 require a working platform with edge protection where a fall could cause injury; a ladder is for access and for short-duration light work only. A roofer's insurer takes the same view. The scaffold is £600–£1,500 on a semi-detached house and is on every honest quote; a quote without it is either using someone else's scaffold or not intending to comply.
Do I need Building Control to replace a roof?
Yes, where more than 50% of the roof covering is replaced, because that is a renovation of a thermal element under Approved Document L and the insulation must be brought up to the current standard where practicable (270 mm at ceiling level for a pitched roof with a cold loft). A roofer registered with a competent-person scheme such as CompetentRoofer self-certifies and notifies on your behalf; otherwise a building notice is submitted to the council (£150–£300). Structural changes (new rafters, a heavier covering on a roof designed for a lighter one) also need Building Regulations approval under Part A.
Regulations & Standards
Work at Height Regulations 2005 (SI 2005/735) — hierarchy of control; working platforms, edge protection, ladders for short-duration work only; Schedule 6 (ladders)
Construction (Design and Management) Regulations 2015 (SI 2015/51) — contractor duties, construction phase plan, domestic client duties passing to the contractor
Building Regulations 2010, Regulation 23 and Approved Document L, Volume 1: Dwellings (2021) — renovation of thermal elements (roofs); 0.16 W/m²K at ceiling level, 0.18 W/m²K at rafter level or flat roof
Building Regulations 2010, Approved Document A — structure; roof loading where the covering weight changes
Building Regulations 2010, Approved Document C — resistance to moisture; roof coverings and underlays
Building Regulations 2010, Approved Document F — roof void ventilation where insulation is upgraded
BS 5534:2014+A2:2018 — slating and tiling for pitched roofs and vertical cladding; code of practice (fixing specification, wind uplift, battens, underlay)
BS 8612:2018 — dry-fixed ridge, hip and verge systems for slating and tiling; specification
BS 5250:2021 — management of moisture in buildings; cold and warm roof ventilation
BS EN 12588:2006 — lead and lead alloys; rolled lead sheet for building purposes (Code 3–8)
BS EN 1304:2013 — clay roofing tiles and fittings; BS EN 490:2011+A1:2017 — concrete roofing tiles and fittings; BS EN 12326-1:2014 — slate and stone for discontinuous roofing
BS 8000-0:2014+A1:2024 — workmanship on construction sites; general principles
Control of Substances Hazardous to Health Regulations 2002 (SI 2002/2677) — respirable crystalline silica from cutting tiles and slates
Consumer Rights Act 2015 (s.49–s.52); Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 (SI 2013/3134); Income Tax (Construction Industry Scheme) Regulations 2005 (SI 2005/2045); Value Added Tax Act 1994 (£90,000 threshold from 1 April 2024)
HSE — Work at height: roof work — platforms, edge protection and fragile roofs
HSE — Work at Height Regulations 2005: a brief guide (INDG401) — the hierarchy and the ladder rules
HM Government — Approved Document L, Volume 1: Dwellings (2021) — renovation of thermal elements including roofs
NFRC — National Federation of Roofing Contractors: technical guidance and CompetentRoofer — BS 5534 guidance and the Building Regulations self-certification scheme
Lead Sheet Training Academy — Rolled lead sheet manual — codes, details and fixing
HMRC — Construction Industry Scheme (CIS) — deduction rates for subcontract roofing
HMRC — VAT registration thresholds — the £90,000 compulsory threshold
pricing labour — the cost-based pricing method and baseline day rates by trade
day rate to hourly rate calculator — converting between day rate, hourly rate and billable hours
roof repair pricing guide — repairs by the half-day and per item
slate roof pricing guide — natural slate re-roofing in detail
flat roof replacement pricing guide — GRP, EPDM and felt flat roof pricing
scaffolding pricing guide — the scaffold line on every re-roof
replacement fascia and soffits pricing guide — the job that often goes with a re-roof
re roofing — strip vs overlay, membrane, BS 5534 fixings and battens
roof safety — work at height on pitched roofs
lead work — lead codes, details and pricing
work at height regs 2005 — the regulation behind the scaffold
bricklayer day rate guide — the equivalent guide for the trade that often shares the scaffold