Summary

CCTV drain surveys have moved from a specialist service to a routine one. Homebuyers commission them because RICS surveyors recommend them on anything pre-1970; insurers demand them before accepting a subsidence or escape-of-water claim; landlords need them for persistent blockages; and every drainage repair of any size starts with a camera. The equipment has come down in price to the point where many drainage contractors, plumbers and groundworkers now carry a push-rod camera, which has pushed domestic survey prices down and made the margin depend on efficiency and on selling the survey as the start of a job rather than as a product in itself.

Pricing a survey well means understanding what the customer is actually buying. A homeowner with a slow kitchen gully wants a diagnosis and a fix; the survey is a means to that, and a cheap or free camera look that leads to a £400 jetting and repair job is a good outcome. A homebuyer's solicitor wants a document: a drawn plan with manhole references, pipe sizes, materials, depths, a coded defect schedule and a condition grade for each run, in a format a surveyor can rely on. That takes twice as long and carries professional risk, and should be priced accordingly. A commercial client wants metres surveyed and a report that complies with the water company's or the engineer's specification, priced per metre with a day-rate floor.

This guide gives 2026 prices for each type, the cost base behind them (equipment, operator time, software, insurance), what a compliant report must contain, where the extras lie (jetting, excavation of buried chambers, root cutting, sonde tracing, repeat visits), and a worked example. For the survey method itself see drain cctv survey and drainage cctv survey; for the ownership rules that decide who pays for repairs see drain ownership and responsibility.

Key Facts

Quick Reference Table

Spending too long on quotes? squote turns a 2-minute voice recording into a professional quote.

Try squote free →
Survey type Typical scope Time on site Price range (2026, ex VAT) Deliverable
Domestic diagnostic (fault-finding) One or two runs, push-rod 1–2 hours £150–£350 Footage, short report, repair recommendation
Homebuyer / pre-purchase, terrace or semi All accessible foul and surface water runs 2–3 hours + reporting £250–£400 Plan, manhole schedule, MSCC5 defect list, grades
Homebuyer, detached or large property 6+ runs, multiple chambers 3–5 hours + reporting £400–£650 As above
Insurance claim survey (subsidence / escape of water) Specified runs, with depth and location of defects 2–4 hours + reporting £350–£600 Report formatted for loss adjuster, sonde-located defects
Commercial per-metre, 100–150 mm Push-rod or small crawler Per day £1.50–£2.50/m, min £350 MSCC5 coded report, WinCan or similar
Commercial per-metre, 225–600 mm Crawler camera Per day £2.50–£4.00/m, min £500 As above, plus traffic management if on highway
New-build adoption / Section 104 survey Per water company specification Per day £3.00–£5.00/m Report to the undertaker's CCTV spec
Jetting prior to survey Van-pack jetter Per hour £90–£150/hour Usually one hour minimum
Sonde tracing and marking defect location With survey 15–30 min per location £40–£80 extra Marked position and depth
Locate and expose buried inspection chamber CAT scan, dig, lift 30–90 min £80–£200 extra Chamber made accessible
Repeat visit (drain not clear, access not available) Return trip — £90–£150 —

Detailed Guidance

Understand the three customers

The homeowner with a problem is buying a fix. Here the survey is a diagnostic tool and competes with a jetting company's "free camera look" marketing. Price the survey at the bottom of the band or include it in a jetting-and-survey visit at £250–£400, and make it clear that the survey fee is credited against repair work above a stated value. Your margin comes from the repair.

The homebuyer is buying a document that their solicitor, lender and surveyor will act on. They have usually been told by an RICS Level 2 or Level 3 survey to get one, and they want the survey to say the drains are either fine or specifically not fine, with costs. This is where the report quality, the plan, the grading and your professional indemnity cover justify £250–£500. It is also where the liability sits: a report that missed a collapsed run under the extension is a report you will be asked about in two years.

The commercial client or specifier is buying metres surveyed to a specification. The price is per metre with a minimum, the report format is dictated (MSCC5 coding in WinCan or the undertaker's template), and the real variables are access, traffic management, and how much of the day is spent waiting for a site manager with the chamber keys. Quote a day rate with a metres-per-day expectation, and state the per-metre rate for anything over.

The cost base behind the price

Price from your real costs, not from the cheapest advert in the area. A one-operator push-rod business carries roughly:

Annual cost item Typical (push-rod operation)
Camera system depreciation and repairs (£6,000 over 5 years + £800/yr repairs) £2,000
Van, fuel, insurance, maintenance £7,000–£10,000
Reporting software licence and support £500–£1,500
Public liability and professional indemnity £1,200–£2,000
Training, WRc coding refresher, NADC or trade membership £400–£900
Phone, accounting, marketing, admin time £3,000–£5,000
Operator's own labour at £180–£220 a day target × 200 days £36,000–£44,000
Total to recover over ~200 billable days £50,000–£63,000 → £250–£320 per day before profit

Add 20–30% profit and the day rate lands at £350–£450, which is two domestic surveys at £175–£225 or one homebuyer survey at £300–£400 plus a diagnostic. A crawler operation roughly doubles the equipment line and adds a second person on most jobs, which is why its day rate is £650–£1,000.

What a compliant report contains

Insurers, water companies and surveyors expect a report to the WRc Manual of Sewer Condition Classification, 5th edition (MSCC5), which implements BS EN 13508-2:2003+A1:2011 coding in the UK. For a homebuyer survey the minimum is:

Anything less than this is a diagnostic survey and should be sold as one. Do not call a 20-minute camera look a "homebuyer survey" and charge £350 for it; that is the report that ends up in a complaint.

Extras and how to price them

The items that turn a 90-minute survey into a four-hour one:

Selling the follow-on work

For a drainage contractor the survey's real value is the repair it finds. A survey report that grades a run 4 for a displaced joint and recommends a localised patch liner at £450–£900, or an excavation and repair at £600–£1,500 per metre, converts to work at a high rate if the report is clear and the price is in it. Price the survey honestly, present the findings plainly (the footage speaks for itself), and quote the repair options in the same document. Many contractors credit the survey fee against repairs over £500. See no dig drain repair and foul drainage repair for the repair methods and blocked drain clearance pricing guide for jetting prices.

Worked example: homebuyer survey, 1930s semi

Four inspection chambers (one buried under a patio slab), two gullies, foul and surface water combined, 38 m of 100 mm clayware surveyed, one root intrusion, two displaced joints, one chamber benching broken.

Element Time / quantity Rate Total (ex VAT)
Travel and set-up 45 min £55/hour £41
Survey of 38 m, 4 runs, push-rod 2 hours £55/hour £110
Locate and expose buried chamber (agreed on site) 1 hour £55/hour + extra £120
Sonde trace and mark two defect locations 30 min £60 £60
Reporting: plan, manhole schedule, MSCC5 coding, grading, recommendations 1.5 hours £55/hour £83
Equipment and software contribution per survey £40
Insurance (PI and PL) contribution per survey £15
Cost £469
Margin 25% £117
Price £586

Quoted as £420 for the survey and report plus the buried chamber extra at £120 and sonde marking at £60, agreed on site: £600 ex VAT. A diagnostic survey on the same house for a homeowner with a blockage would have been £180–£250, with the jetting and repair carrying the margin.

Terms to put in the quotation

Frequently Asked Questions

How long does a domestic CCTV survey take?

A diagnostic survey of one or two runs takes 60–90 minutes on site including set-up and a short report. A homebuyer survey of a typical semi takes two to three hours on site and another hour to ninety minutes of reporting, more if chambers have to be found and exposed. Price the time you will actually spend, not the time the cheapest advert implies.

Can I offer a "free CCTV survey"?

Many jetting companies do, as a route to repair work. It can be a sound sales tactic for the fault-finding customer, provided the repair prices carry the cost of the surveys that do not convert. It is not appropriate for a homebuyer or insurance report, where the client is paying for an independent, documented opinion; a free report that recommends £3,000 of work from the firm that wrote it is a report a solicitor will question.

What qualification do I need to carry out drain surveys?

There is no statutory licence. For commercial and insurance work, specifiers expect the operator to hold WRc-approved MSCC5 coding training and the Drainage Industry CCTV operator qualification, and the firm to be an NADC member or on a water company's approved list. For homebuyer work, customers and surveyors look for a coded report, a plan, professional indemnity insurance and trade membership. For diagnostic work, competence and a decent camera are enough, but the coding course is worth it for the credibility of every report you issue.

Who pays if the defect is in the shared drain?

Since 1 October 2011 the sewerage undertaker is responsible for shared drains (any pipe serving more than one property) and for the lateral drain beyond the property boundary in England and Wales. Your report should state which runs are private and which are public, so the customer knows which repairs to ask the water company for. Repairs to public sewers are not yours to quote. See drain ownership and responsibility.

Should I charge per metre for domestic work?

No. Domestic runs are short, the time is dominated by set-up, access and reporting, and customers find per-metre pricing confusing on a 25 m system. Charge per survey type for domestic work and per metre, with a day-rate minimum, for commercial and adoption work where the metres are long enough to make the unit meaningful.

Regulations & Standards