EV Charger Brands Compared: Ohme, Zappi, Andersen, Pod Point and Hypervolt — Features and Installer Margins

Quick Answer: The leading UK domestic EV chargepoint brands are Myenergi Zappi, Ohme Home Pro, Andersen A2, Pod Point Solo 3, Wallbox Pulsar Plus, and Hypervolt Home 3. Each has strengths: Zappi leads on solar integration; Ohme on tariff intelligence; Andersen on aesthetics; Pod Point on simplicity. All comply with OZEV requirements and Smart Charge Points Regulations 2021. Installer margins vary: most brands offer installer trade pricing 15–30% below RRP. Always supply from your installer account rather than directing customers to buy their own.

Summary

Recommending the right chargepoint brand for each customer is part of the installer's value-add. The hardware choice affects the customer's daily experience for 10+ years. The key differentiators are: smart tariff integration (Octopus, Economy 7), solar export diversion, aesthetics, build quality, app quality, warranty, and installer support.

This article compares the major UK brands on the criteria that matter most to electricians and their customers. It is not a review of every specification — it is a practical guide to which chargepoints suit which customer scenarios.

Key Facts

• OZEV approved list — all major brands have models on the OZEV approved list; confirm the specific model before specifying for a grant installation
• Smart Charge Points Regulations 2021 — all models discussed here comply
• IEC 62196 Type 2 connector — all use Type 2; either tethered (cable attached) or socketed (untethered, Type 2 socket)
• Maximum AC charge rate — all domestic models are 7.4kW (32A single-phase); three-phase variants at 22kW available for some brands
• IP rating — minimum IP54 for outdoor installation; most leading brands are IP55 or higher
• Integral RCD/DC detection — most modern chargepoints include a DC leakage detector (satisfying BS 7671 requirement for RCD type); check each model specification
• Tethered cable length — standard 5m; 8m available on some models for longer distances to the vehicle
• V2G capability — vehicle-to-grid is not available on any mainstream affordable domestic chargepoint as of 2026; specialist V2G units from Wallbox (Quasar), OVO Energy, and Octopus exist but are premium/limited availability

Quick Reference Table: UK Domestic Chargepoint Brand Comparison

Prices are approximate and vary by supplier and configuration. Always confirm current pricing with your trade account.

Detailed Guidance

Myenergi Zappi v2.1

Best for: Solar PV customers; eco-conscious customers; myenergi ecosystem users

The Zappi is the market leader for solar self-consumption integration in the UK. Its three operating modes (eco, eco+, fast) allow real-time modulation of charge current to match solar export. This is its defining feature and the main reason to specify it over competitors for customers with solar panels.

Key strengths:

• Superior solar divert functionality: live CT clamp measurement; current modulation from 6A to 32A in ~5A steps
• myenergi Hub integration: coordinates with Eddi (immersion divert), Libbi (battery), and future devices
• App quality: highly rated; real-time charge data; scheduling; tariff integration via hub
• Physical design: functional rather than beautiful; some customers prefer a more premium aesthetic

Key weaknesses:

• Larger and less minimalist than Andersen or Hypervolt
• Solar divert requires a CT clamp on grid tails — additional installation step
• More complex commissioning than simpler chargepoints

Installer notes: Zappi units require the CT clamp to be fitted and configured during commissioning. If the customer has no solar PV, the Zappi is still functional as a standard smart chargepoint, but the solar features are unused. In that case, consider whether the higher cost is justified vs Pod Point or Ohme.

Ohme Home Pro

Best for: Customers on smart/time-of-use tariffs (Octopus Go, Agile, Economy 7); customers who want minimal fuss

The Ohme is the tariff intelligence champion. It integrates natively with Octopus Energy and pulls the user's tariff half-hourly pricing to automatically schedule charging at the cheapest times. For customers on Octopus Agile, it can charge in the cheapest windows automatically — no manual scheduling required.

Key strengths:

• Native Octopus Energy integration (one of the best in class)
• Scheduled charging with tariff awareness: automatically moves charging to cheapest window
• Clean, modern physical design
• Simple installation: no CT clamp required for basic operation
• Good warranty and UK customer support

Key weaknesses:

• Solar divert is limited: Ohme can be fitted with a CT clamp, but it does not do the same real-time current modulation as Zappi; it schedules charging when solar generation is forecast to be high rather than live-modulating. For serious solar self-consumption, Zappi is better.
• Less suited to customers who don't engage with tariff optimisation (they may not notice the benefit)

Installer notes: Simple to commission: install the hardware, connect to Wi-Fi, pair with Ohme app, enter the customer's energy tariff. No CT clamp required unless load management is also needed.

Andersen A2

Best for: Premium residential installs; design-conscious customers; properties where the chargepoint will be prominently visible

The Andersen A2 is the premium aesthetic option. It is available in multiple finishes (including wood-grain fascias) and is often specified in high-end residential developments and listed building curtilage where the installation must blend with the architecture.

Key strengths:

• Best-in-class aesthetics; multiple colour and finish options
• Solid build quality; UK-designed
• Good app and smart charging functionality
• Premium cable management (cable channels available to tidy the tethered cable)

Key weaknesses:

• Significantly more expensive than competitors; no real functional advantage over Zappi or Ohme
• No solar divert mode
• Higher price point may be a barrier for price-sensitive customers

Installer notes: Andersen units have slightly different installation requirements for cable management and fixing. Familiarise yourself with the installation manual before first install. Higher price point means higher absolute margin in pounds even at the same percentage.

Pod Point Solo 3

Best for: Customers who want a simple, reliable, affordable chargepoint with no complications

Pod Point (owned by EDF Energy) is one of the best-known UK EV charging brands. The Solo 3 is a straightforward, competitively priced smart chargepoint with a clean design and reliable operation.

Key strengths:

• Competitive price
• Reliable, proven hardware
• Good UK customer support and warranty
• Simple app
• OZEV-approved

Key weaknesses:

• No solar divert mode
• App functionality less advanced than Ohme or Zappi
• Less installer margin than some alternatives

Installer notes: Easy to install and commission. A good default choice for customers who are not interested in solar or tariff optimisation and want a simple, reliable solution.

Wallbox Pulsar Plus

Best for: Compact installations; multi-chargepoint commercial setups; customers who want a small footprint chargepoint

The Wallbox Pulsar Plus is notable for its very small size — about the size of a thick book. It is OCPP-compatible, making it suitable for commercial or managed installations.

Key strengths:

• Very compact (130mm × 130mm footprint)
• OCPP 1.6 support: suitable for commercial CPMS integration
• Good load balancing when multiple units are installed together
• Competitive price

Key weaknesses:

• Smaller screen/display than competitors
• Solar divert is basic eco-mode via CT clamp; not as refined as Zappi

Hypervolt Home 3

Best for: Customers who want premium aesthetics with smart features at a lower price than Andersen

Hypervolt is a UK brand with a strong following for its clean white premium design and improving smart features. The Home 3 model includes Octopus Agile integration and basic eco mode charging.

Key strengths:

• Premium matte white design at a lower price than Andersen
• Octopus Agile integration built-in
• Good UK support
• Improving smart feature set

Key weaknesses:

• Solar divert is less capable than Zappi
• Smaller app ecosystem than Ohme or Zappi

Installer Margin Considerations

All major chargepoint manufacturers offer trade pricing to registered installers. Typical trade price is 15–30% below RRP. To access trade pricing:

• Register as an installer on the manufacturer's installer portal
• For OZEV grants, register as an OZEV-authorised installer (separate from manufacturer installer registration)

Margin strategy:

• Supply the chargepoint from your trade account; do not direct customers to buy their own hardware separately
• Include the chargepoint in your installation quote as a supplied-and-fitted item
• Your margin on hardware plus labour on the install gives the total job margin
• Higher-priced chargepoints (Andersen, Hypervolt) yield higher absolute margin in pounds at the same percentage

Manufacturer support: Before committing to a brand, assess the manufacturer's installer support: training availability, technical helpline, warranty claims process, and supply reliability. Some brands are excellent at supporting installers; others are poor. Network with other electricians and check installer forums for current feedback.

Frequently Asked Questions

Which chargepoint should I recommend for most customers?

For the majority of domestic customers without solar PV: Ohme Home Pro (if on a smart tariff) or Pod Point Solo 3 (if they want simplicity). For solar customers: Myenergi Zappi. For premium aesthetics: Andersen A2 or Hypervolt Home 3. For commercial/OCPP: Wallbox Pulsar Plus.

Should I become approved with multiple brands or focus on one?

Focus on two or three brands for most of your installs — this builds expertise and keeps van stock manageable. Have a specialist option (Andersen for premium) and a workhorse option (Ohme or Pod Point) for most jobs. Avoid stocking every brand; chargepoint technology evolves quickly and obsolete stock is a risk.

Can a customer supply their own chargepoint?

Yes, but it complicates OZEV grant claims (the installer must supply from the approved list to claim). It also means the installer takes on warranty risk if the customer-supplied chargepoint develops a fault during installation. Generally, insist on supplying the hardware for warranty and commercial clarity; most customers are happy with this when you explain the grant process.

Regulations & Standards

• Electric Vehicles (Smart Charge Points) Regulations 2021 (SI 2021/1467) — all chargepoints must be OZEV-approved and smart

• OZEV Approved Product List — current list at gov.uk; model-specific, not brand-wide

• BS 7671:2018+A2:2022 — Chapter 722: chargepoint circuit requirements independent of brand

• OZEV Approved Product List — GOV.UK — confirm current approval status

• Myenergi Zappi — myenergi.com — Zappi installer registration

• Ohme — ohme-ev.com — Ohme installer portal

• Andersen EV — andersen-ev.com — installer programme

• Hypervolt — hypervolt.co.uk — installer portal

• ev charger installation types — Mode 3 circuit design and hardware overview

• ev charger solar integration — solar divert configuration for Zappi

• ct clamp load management — CT clamp setup for load management and solar divert

• ozev approved installer — becoming an OZEV-authorised installer

• ev charger testing commissioning — commissioning all brands