asbestos

15 articles

• Asbestos Awareness Training: Who Needs It, Cat A vs Cat B Certification and Refresher Requirements
  CAR 2012 Reg 10: Cat A (awareness, half-day) vs Cat B (non-licensed work, full day) vs Cat C (licensed, 2-3 days); UKATA/RSPH provider standards; annual Cat B refresher; sole trader obligations
• Asbestos Cement Products: Corrugated Sheets, Downpipes and Flue Pipes — Low-Risk Handling and Disposal
  Asbestos cement corrugated sheets, downpipes and flue pipes: low-risk but not zero; wet-removal method; encapsulation preference; non-licensed handling with FFP3; UN2590 transport; licensed disposal
• Asbestos Floor Tiles: Encapsulation vs Removal, Risk from Disturbance and Guidance for Flooring Contractors
  VAT and thermoplastic tiles plus bitumen mastic adhesive (often also contains asbestos); encapsulation vs removal; risk by method; avoid electric strippers/floor buffers; H-type vacuum requirement
• Asbestos in Textured Coatings (Artex): Risk Assessment, Licensed vs Non-Licensed Removal and Overskimming
  Artex/textured coatings pre-2000: chrysotile 2–5%; overskimming as low-risk option; NNLW wet-scraping; licensed work triggers (dry sanding per CAR 2012 Schedule 2/L143 ACOP); sampling procedure
• Asbestos Management Plan: What It Must Include, Who Writes It and How Tradespeople Should Access It
  AMP required content under CAR 2012 Reg 4(9); who writes it (BOHS P405 qualified); six-step process for tradespeople to access and use the AMP before starting work
• Asbestos Pipe Lagging and Insulation: High-Risk Material, Licensed Removal Requirements and Disturb-Free Working
  Pipe lagging as high-risk/nearly always licensed: amosite/crocidolite fibres; 14-day HSE notification (Reg 9 CAR 2012); four-stage clearance; emergency provisions under Reg 16; plant room AIB co-location risk
• Asbestos PPE and Respirators: FFP3 vs P3 PAPR, Half Mask vs Full Face and Fit Testing Requirements
  APF system: FFP3=20, half-mask P3=20, full-face P3=40, PAPR=2000; EN 149:2001+A1:2009; qualitative vs quantitative fit testing; facial hair prohibition; HSG53 (4th edition) reference
• Asbestos Removal Enclosure Setup: Negative Pressure Units, 3-Stage Decontamination and Air Monitoring
  Asbestos enclosure construction: 1,000 gauge poly, smoke pen leak test, 5 Pa negative pressure, H14 HEPA NPU; 3-stage DCU; 4-stage clearance procedure; 0.01 f/cm³ clearance criterion; UKAS independent analyst
• Asbestos Survey Types: Management Survey vs Refurbishment/Demolition Survey — When Each Is Required
  Management survey (HSG264) for in-use premises vs Refurbishment/Demolition survey before intrusive work; surveyor qualifications (BOHS P402/UKAS ISO 17020); what tradespeople must check before starting
• Asbestos Waste Disposal: Double-Bagging, Labelling, EA Hazardous Waste Consignment Notes and Licensed Sites
  Double-bagging procedure; EWC codes 17 06 01* and 17 06 03*; Hazardous Waste Consignment Note per consignment; EA/NRW/SEPA carrier registration verification; ADR UN2212/UN2590 transport classification
• Control of Asbestos Regulations 2012: Duty to Manage, Regulation 4 Obligations and Who Is Responsible
  CAR 2012 SI 2012/632: three-tier work classification (non-licensed/NNLW/licensed), Regulation 4 duty to manage, control limits (0.1 f/cm³ TWA, 0.6 f/cm³ short-term), employer obligations and penalties
• HSE Licensed Removal: When a Licence Is Required, How to Apply and Notifiable Non-Licensed Work (NNLW)
  HSE licence requirement for AIB, sprayed insulation and lagging; application process via ALU; NNLW notification (Reg 9); air monitoring and clearance certificate obligations; verifying contractors via HSE register
• Identifying Asbestos-Containing Materials: Common ACMs in UK Homes and Commercial Buildings Pre-2000
  Identifying common ACMs in UK buildings pre-2000: sprayed coatings, pipe lagging, AIB, textured coatings (Artex), asbestos cement, floor tiles and adhesives; risk levels and work category for each
• Notifiable Non-Licensed Asbestos Work (NNLW): Notification to HSE, Medical Surveillance and Record-Keeping
  NNLW under CAR 2012 Reg 9: HSE notification before work starts (no fixed statutory minimum period); medical surveillance (3-year intervals); 40-year health record retention; vs licensed work 14-day advance notice
• Refurbishment and Demolition Asbestos Survey Process: Scope, Sampling Density and Analyst Accreditation
  HSG264 R&D survey process: Reg 7 CAR 2012 trigger; five-stage process; UKAS ISO 17020 and BOHS P402 competence; sampling density; risk priority scoring; what a survey does and does not tell you